How to Make a Fabric Picture Frame

Step-by-Step Guide

1. 1

   Step 1: Measure the length and width of your picture.

   This will create an open frame. , Pleat or gather the fabric around the corners of the open frame.
   
   Fold and hold the fabric in place, with common pins, until ready to staple. , Glue the back of the open frame to the front of the solid covered cardboard.
   
   Glue the sides and bottom of the frame together, leaving the top as an opening.
   
   Hold the two pieces together with clothespins until the glue dries. , Staple it to the center back of the frame. ,
2. 2

   Step 2: Cut two pieces of cardboard

3. 3

   Step 3: to the same length and width

4. 4

   Step 4: adding an extra inch on all sides.

5. 5

   Step 5: Carefully cut the center out

6. 6

   Step 6: of one of the pieces of cardboard

7. 7

   Step 7: to the exact length and width of your picture.

8. 8

   Step 8: Cover each piece of cardboard with fabric

9. 9

   Step 9: stapling the fabric to the back of the cardboard.

10. 10

    Step 10: Glue the two pieces together with a moderate amount of glue.

11. 11

    Step 11: Cut a small piece of cardboard

12. 12

    Step 12: to the proper length and width

13. 13

    Step 13: to support the frame.

14. 14

    Step 14: Place your picture inside the frame by sliding it into the upper opening.

Detailed Guide

About the Author