How to Make Paper Look Like Stained Glass
Create a drawing., Draw the image onto white paper., Add geometric shapes around the initial image., Hold the paper up to a window with the images facing outward., Color in the drawn images with crayons., Finish by coloring in all of the remaining...
Step-by-Step Guide
-
Step 1: Create a drawing.
Decide on a simple drawing the first time that you try this, so that you can concentrate most on getting the technique accurate.
Afterwards, you can progress to more advanced drawings.
Some ideas for trying first include a star, a moon, a basic tree, a flower or the outline of a cat or dog.
It is also recommended that you keep your first design small, as there is a lot of coloring in required. -
Step 2: Draw the image onto white paper.
Use permanent black marker to sketch the image in place.
Position the drawing in the center of the white paper.
If you prefer, print out a simple design using black ink on white paper. , These help to give the impression of a stained glass window.
Diamonds, squares and rectangles are suitable shapes. , Using the light to highlight the images, draw around them on the back of the paper as well. , Used different colors for each image, and perhaps different colors within the image.
Color them on both sides. , The whole sheet of paper must be colored in for the best effect, both front and back. , Use a cotton swab or bud as the "brush".
Turn the paper over to the back.
Dip the swap into the oil, then coat sections at a time of the back of the drawing.
Continue until you have covered the entire back of the paper.
Be sparing with the amount of baby oil used.
It should be just enough to coat the paper for a translucent effect.
Avoid having it drip off or thoroughly soak the paper.
Paint gently; if you press too hard, the paper may rip. , See Warnings below for what might happen if it's not dry enough. , Thread a piece of ribbon or string through it and tie in a loop for hanging.
You can stick this step if you're going to use poster tack or tape to attach the paper to the window. , The light will shine through, the baby oil will intensify the colors and let the light shine through, giving the impression of a stained glass window. -
Step 3: Add geometric shapes around the initial image.
-
Step 4: Hold the paper up to a window with the images facing outward.
-
Step 5: Color in the drawn images with crayons.
-
Step 6: Finish by coloring in all of the remaining background of the paper.
-
Step 7: Coat the back of the drawing in a small amount of baby oil.
-
Step 8: Allow to dry fully.
-
Step 9: Punch or pierce a hole in the top of the paper.
-
Step 10: Hang or attach the drawing on a window.
Detailed Guide
Decide on a simple drawing the first time that you try this, so that you can concentrate most on getting the technique accurate.
Afterwards, you can progress to more advanced drawings.
Some ideas for trying first include a star, a moon, a basic tree, a flower or the outline of a cat or dog.
It is also recommended that you keep your first design small, as there is a lot of coloring in required.
Use permanent black marker to sketch the image in place.
Position the drawing in the center of the white paper.
If you prefer, print out a simple design using black ink on white paper. , These help to give the impression of a stained glass window.
Diamonds, squares and rectangles are suitable shapes. , Using the light to highlight the images, draw around them on the back of the paper as well. , Used different colors for each image, and perhaps different colors within the image.
Color them on both sides. , The whole sheet of paper must be colored in for the best effect, both front and back. , Use a cotton swab or bud as the "brush".
Turn the paper over to the back.
Dip the swap into the oil, then coat sections at a time of the back of the drawing.
Continue until you have covered the entire back of the paper.
Be sparing with the amount of baby oil used.
It should be just enough to coat the paper for a translucent effect.
Avoid having it drip off or thoroughly soak the paper.
Paint gently; if you press too hard, the paper may rip. , See Warnings below for what might happen if it's not dry enough. , Thread a piece of ribbon or string through it and tie in a loop for hanging.
You can stick this step if you're going to use poster tack or tape to attach the paper to the window. , The light will shine through, the baby oil will intensify the colors and let the light shine through, giving the impression of a stained glass window.
About the Author
Sarah Rodriguez
Professional writer focused on creating easy-to-follow lifestyle tutorials.
Rate This Guide
How helpful was this guide? Click to rate: