How to Do an Ozone Shock Treatment on a Vehicle

Rent an ozone generator., Thoroughly clean the car and remove all trash and personal belongings., Vacuum the car and wipe off all of the hard surfaces. , Attach a flexible duct to the ozone generator., Close all of the windows and doors on the...

9 Steps 2 min read Medium

Step-by-Step Guide

  1. Step 1: Rent an ozone generator.

    There are websites that will ship them, and some equipment rental places stock them as well.

    Renting the right ozone generator will make the process more effective.

    While exact figures are not well-established, a generator rated at 3500mg/h is probably the bare minimum to do an effective shock treatment on a mid-sized car.

    Larger vehicles may require a more powerful generator.

    Units up to 12000 mg/h have been used effectively and safely.

    It is essential that the unit be compatible with a flexible duct.
  2. Step 2: Thoroughly clean the car and remove all trash and personal belongings.

    Take everything out of the car, including the spare tire.

    Anything left behind could potentially be damaged or discolored by the ozone. ,, Some ozone machines will come with the duct, but any dryer duct will do.

    Duct tape may be helpful. , The ozone generator should remain outside the vehicle to allow it access to fresh air. , The idea is to seal up the car to prevent the ozone from escaping the vehicle. , No one should be in the car during this process.

    No animals should be in the car during this process.

    Do not run the generator longer than the recommended time. , The slight ozone smell is normal and will disappear completely after three or four days.

    If necessary, repeat the ozone shock treatment after airing out the vehicle.
  3. Step 3: Vacuum the car and wipe off all of the hard surfaces.

  4. Step 4: Attach a flexible duct to the ozone generator.

  5. Step 5: Close all of the windows and doors on the vehicle

  6. Step 6: but leave one window open wide enough to feed the duct into the vehicle.

  7. Step 7: Seal off the remainder of the open window using plenty of cardboard and tape.

  8. Step 8: Run the ozone generator at full power for at least 30 minutes but no longer than two hours.

  9. Step 9: Air out the vehicle to allow the ozone to dissipate.

Detailed Guide

There are websites that will ship them, and some equipment rental places stock them as well.

Renting the right ozone generator will make the process more effective.

While exact figures are not well-established, a generator rated at 3500mg/h is probably the bare minimum to do an effective shock treatment on a mid-sized car.

Larger vehicles may require a more powerful generator.

Units up to 12000 mg/h have been used effectively and safely.

It is essential that the unit be compatible with a flexible duct.

Take everything out of the car, including the spare tire.

Anything left behind could potentially be damaged or discolored by the ozone. ,, Some ozone machines will come with the duct, but any dryer duct will do.

Duct tape may be helpful. , The ozone generator should remain outside the vehicle to allow it access to fresh air. , The idea is to seal up the car to prevent the ozone from escaping the vehicle. , No one should be in the car during this process.

No animals should be in the car during this process.

Do not run the generator longer than the recommended time. , The slight ozone smell is normal and will disappear completely after three or four days.

If necessary, repeat the ozone shock treatment after airing out the vehicle.

About the Author

P

Peter Gray

Peter Gray specializes in digital media and internet and has been creating helpful content for over 11 years. Peter is committed to helping readers learn new skills and improve their lives.

37 articles
View all articles

Rate This Guide

--
Loading...
5
0
4
0
3
0
2
0
1
0

How helpful was this guide? Click to rate: