How to Drive Safely in Heavy Traffic
Remove all distractions., Drive defensively., Plan your driving times to avoid heavy traffic., Pay attention to heavy traffic in the distance., Use lower gears to improve your engine efficiency., Allow a three second distance between you and traffic...
Step-by-Step Guide
-
Step 1: Remove all distractions.
In heavy traffic conditions, the road will be crowded with cars, the flow of traffic irregular, and people will start getting impatient, leading to them trying to merge where they likely shouldn’t.
The last thing you need is a distraction preventing you from paying attention to these things.
Limit your distractions by:
Turning off your cell phone, or turning it to silent.
Turning off your music, or turning it down.
Telling your passengers to quiet down until you’re free of dense traffic. -
Step 2: Drive defensively.
Defensive driving covers a wide range of skills you should employ to prevent dangerous situations on the road before these occur.
You should plan for ways you can react in an emergency situation, like if another vehicle were to try and merge into you.
In addition to this, you should also:
Keep your eyes scanning traffic and road conditions.
Identify vehicles that appear unsafe, such as those that are erratically merging across lanes, speeding dangerously, or drifting within a lane.
Follow the flow of traffic.
Signal before making a turn or merging into a lane.
Allow plenty of space between you and other vehicles/structures.
Never drive while tired or emotionally agitated., In many cases, even leaving fifteen minutes before the start or after the end of rush hour can dramatically decrease the flow of traffic on your drive.
Though the worst times for traffic (rush hour) will vary according to city, generally you can expect it to be heaviest between 8 and 9 AM, and 5 and 6 PM., When you are approaching a crowded section of road, you should take your foot of the accelerator and coast forward, allowing friction to slow your vehicle.
This will moderate your speed while saving you gas.
Depending on your distance, you may also need to use your brake to slow to an acceptable speed when approaching heavy traffic.
By slowing your speed, there is a chance that the heavy traffic will break up before you reach it.
This constant, slower speed will save you gas and create less potential for accidents., Even in automatic cars, where you don’t normally have to shift out of drive except to park or move in reverse, there are sometimes lower gear settings.
These are usually noted on your gearshift by the letter “D” followed by a number, like D2 or D3.
D3 or 3 is normally used for stop and go driving.
D2, 2, or S (which stands for ‘slow’) locks your car into second gear, which can be useful if you are driving up or down a steep hill.
Lower gears will also brake more quickly due to naturally occurring "engine braking."
You should gauge how many seconds of distance is between you and the next car ahead.
Do this by picking a feature, like a road sign, and counting slowly up from “one” as the car in front passes the sign.
When your car is even with the sign stop counting.
The number you have stopped counting on represents how many seconds of distance is between you and the car in front of you.
Adjust your speed accordingly.
More time between you and the car in front will mean more reaction time in the event of sudden braking or some other emergency., It’s important that you feel safe when driving, and this might mean you need to drive a little slower than the flow of traffic.
However, driving too slow can make other drivers around you impatient, leading to dangerous driving situations.The speed of stop-and-go traffic will be greatly reduced, meaning that if you or another car do actually collide, the damage will likely be minimal and not physically serious. , Impatient drivers can make poor decisions that might require you to take action to prevent an accident.
In some cases, you may have to merge out of your lane and onto a shoulder.
Keep your eyes scanning traffic, the shoulder of the road, and potential places you might direct your car in the event that you have to make emergency maneuvers. , Your emotional state has an effect on your driving ability, and extreme anxiety can negatively impact your ability to handle heavy traffic.
If you ever feel too overwhelmed by a driving situation, you should:
Exit the freeway and take a break at a rest stop until you’ve calmed down or traffic is lighter.
Turn on your emergency lights and pull well off to the side of the shoulder of the road.
Relax a little bit and listen to some music until you are more comfortable with the flow of traffic. -
Step 3: Plan your driving times to avoid heavy traffic.
-
Step 4: Pay attention to heavy traffic in the distance.
-
Step 5: Use lower gears to improve your engine efficiency.
-
Step 6: Allow a three second distance between you and traffic in front of you.
-
Step 7: Drive at or 5 mph (8.0 km/h) below the speed limit
-
Step 8: even on a highway.
-
Step 9: Prepare yourself for emergency maneuvers.
-
Step 10: Exit the freeway if you are too uncomfortable.
Detailed Guide
In heavy traffic conditions, the road will be crowded with cars, the flow of traffic irregular, and people will start getting impatient, leading to them trying to merge where they likely shouldn’t.
The last thing you need is a distraction preventing you from paying attention to these things.
Limit your distractions by:
Turning off your cell phone, or turning it to silent.
Turning off your music, or turning it down.
Telling your passengers to quiet down until you’re free of dense traffic.
Defensive driving covers a wide range of skills you should employ to prevent dangerous situations on the road before these occur.
You should plan for ways you can react in an emergency situation, like if another vehicle were to try and merge into you.
In addition to this, you should also:
Keep your eyes scanning traffic and road conditions.
Identify vehicles that appear unsafe, such as those that are erratically merging across lanes, speeding dangerously, or drifting within a lane.
Follow the flow of traffic.
Signal before making a turn or merging into a lane.
Allow plenty of space between you and other vehicles/structures.
Never drive while tired or emotionally agitated., In many cases, even leaving fifteen minutes before the start or after the end of rush hour can dramatically decrease the flow of traffic on your drive.
Though the worst times for traffic (rush hour) will vary according to city, generally you can expect it to be heaviest between 8 and 9 AM, and 5 and 6 PM., When you are approaching a crowded section of road, you should take your foot of the accelerator and coast forward, allowing friction to slow your vehicle.
This will moderate your speed while saving you gas.
Depending on your distance, you may also need to use your brake to slow to an acceptable speed when approaching heavy traffic.
By slowing your speed, there is a chance that the heavy traffic will break up before you reach it.
This constant, slower speed will save you gas and create less potential for accidents., Even in automatic cars, where you don’t normally have to shift out of drive except to park or move in reverse, there are sometimes lower gear settings.
These are usually noted on your gearshift by the letter “D” followed by a number, like D2 or D3.
D3 or 3 is normally used for stop and go driving.
D2, 2, or S (which stands for ‘slow’) locks your car into second gear, which can be useful if you are driving up or down a steep hill.
Lower gears will also brake more quickly due to naturally occurring "engine braking."
You should gauge how many seconds of distance is between you and the next car ahead.
Do this by picking a feature, like a road sign, and counting slowly up from “one” as the car in front passes the sign.
When your car is even with the sign stop counting.
The number you have stopped counting on represents how many seconds of distance is between you and the car in front of you.
Adjust your speed accordingly.
More time between you and the car in front will mean more reaction time in the event of sudden braking or some other emergency., It’s important that you feel safe when driving, and this might mean you need to drive a little slower than the flow of traffic.
However, driving too slow can make other drivers around you impatient, leading to dangerous driving situations.The speed of stop-and-go traffic will be greatly reduced, meaning that if you or another car do actually collide, the damage will likely be minimal and not physically serious. , Impatient drivers can make poor decisions that might require you to take action to prevent an accident.
In some cases, you may have to merge out of your lane and onto a shoulder.
Keep your eyes scanning traffic, the shoulder of the road, and potential places you might direct your car in the event that you have to make emergency maneuvers. , Your emotional state has an effect on your driving ability, and extreme anxiety can negatively impact your ability to handle heavy traffic.
If you ever feel too overwhelmed by a driving situation, you should:
Exit the freeway and take a break at a rest stop until you’ve calmed down or traffic is lighter.
Turn on your emergency lights and pull well off to the side of the shoulder of the road.
Relax a little bit and listen to some music until you are more comfortable with the flow of traffic.
About the Author
Kelly Long
Creates helpful guides on crafts to inspire and educate readers.
Rate This Guide
How helpful was this guide? Click to rate: