How to Mix Nail Polish

Select your mixing polishes., Choose your mixing surface., Apply the polishes to the mixing surface., Mix the polishes together., Adjust the shade., Clean off a polish brush., Paint your nails.

7 Steps 4 min read Medium

Step-by-Step Guide

  1. Step 1: Select your mixing polishes.

    Choose the two shades of nail polish you wish to mix.

    Mixing only two polish colors is recommended, because mixing more than two colors can make the mixture appear muddy.

    Normally, using nail polishes with the same base type (glitter, sheer, opaque, matte, etc.) makes for an overall better polish mixture.

    Mixing primary colors is a good rule of thumb to follow when mixing colors.For example, to make a purple polish, mix together a red and blue polish.

    To make a green polish, mix together a yellow and blue polish.

    Like colors tend to mix well too.

    For example, to make a hot orange, mix together a darker orange with a yellow.

    To make a lighter shade of pink, mix together a deeper pink with white polish.

    Nail polishes of the same brand tend to blend together the best.That’s because every brand uses their own polish formula, and polishes of the same brand will most likely accept each other and combine well.
  2. Step 2: Choose your mixing surface.

    A plastic paint palette is one of the easiest surfaces to use and clean, but you can use any surface that is clean, flat, and you don't mind staining.

    Paper plates, wax paper sheets, and tin foil are all common surfaces used for mixing nail polish.Do not use a styrofoam surface for mixing.

    The nail polish will destroy the styrofoam and produce holes in the material.

    You may want to put down a layer of newspaper underneath your workspace, in case of nail polish spills. , Open one of the nail polishes you plan to mix, and without wiping the sides of the brush on the inside of the bottle, dab a drop of paint on your mixing surface.

    Repeat this until you have about five to 10 drops on the mixing surface.

    Then, open up the other bottle of nail polish, and again, without wiping the sides of the brush on the inside of the nail polish bottle, dab about five to 10 drops near the first pool of the nail polish.

    Start out with only a few drops of each nail polish color so you don't waste polish if you don’t like the mixture., Use a toothpick to drag a little bit of both colors into the middle area between them, and gradually mix the two colors together.Mix in a little bit at a time until you get the color you want.

    If you want a swirl of color, stop mixing before they're completely combined.

    Once you’re satisfied with the mixture, consider writing down how much of each color you used so you can make it again later. , This step is optional, but you can make your nail polish lighter or darker by adding a drop at a time of either the lighter color used to make the mixture, or the darker color.Consider adding a drop of white nail polish to make the mixture even lighter.

    However, avoid adding a drop of black nail polish to make the mixture darker, since the black will make the entire mixture have a black shading once it’s mixed in.

    For a more sheer appearance, mix in a drop or two of clear nail polish. , Remove the nail polish brush from the darker polish used to make the mixture.

    Wipe the sides of the brush on the inside of the nail polish bottom to remove any excess nail polish from the brush.

    Soak a cotton ball in nail polish remover.

    Fold the cotton ball over the brush and rub the cotton ball to remove the nail polish from the brush.

    Once most of the nail polish is removed from the brush, inspect the bristles of the brush and pull off any cotton fibers.

    You don’t want stringy fibers getting stuck on your nails as you paint them.

    Use the darker color’s nail polish brush to apply the mixed nail polish onto your nails.

    When you put the brush back into the bottle the mixed polish is less likely to contaminate the color of the darker polish than the lighter polish. , Once you've achieved the color you want, paint your nails as usual with polish mixture.

    Once the polish is dried on your nails, apply a top coat of clear nail polish to protect your nails and make the polish last longer.If your mixing surface was disposable like a paper plate or a sheet of wax paper, throw it out in the garbage can.

    If you used something like a plastic palette, use nail polish remover and a cotton ball to take off the nail polish, and wash the palette with soap and water.
  3. Step 3: Apply the polishes to the mixing surface.

  4. Step 4: Mix the polishes together.

  5. Step 5: Adjust the shade.

  6. Step 6: Clean off a polish brush.

  7. Step 7: Paint your nails.

Detailed Guide

Choose the two shades of nail polish you wish to mix.

Mixing only two polish colors is recommended, because mixing more than two colors can make the mixture appear muddy.

Normally, using nail polishes with the same base type (glitter, sheer, opaque, matte, etc.) makes for an overall better polish mixture.

Mixing primary colors is a good rule of thumb to follow when mixing colors.For example, to make a purple polish, mix together a red and blue polish.

To make a green polish, mix together a yellow and blue polish.

Like colors tend to mix well too.

For example, to make a hot orange, mix together a darker orange with a yellow.

To make a lighter shade of pink, mix together a deeper pink with white polish.

Nail polishes of the same brand tend to blend together the best.That’s because every brand uses their own polish formula, and polishes of the same brand will most likely accept each other and combine well.

A plastic paint palette is one of the easiest surfaces to use and clean, but you can use any surface that is clean, flat, and you don't mind staining.

Paper plates, wax paper sheets, and tin foil are all common surfaces used for mixing nail polish.Do not use a styrofoam surface for mixing.

The nail polish will destroy the styrofoam and produce holes in the material.

You may want to put down a layer of newspaper underneath your workspace, in case of nail polish spills. , Open one of the nail polishes you plan to mix, and without wiping the sides of the brush on the inside of the bottle, dab a drop of paint on your mixing surface.

Repeat this until you have about five to 10 drops on the mixing surface.

Then, open up the other bottle of nail polish, and again, without wiping the sides of the brush on the inside of the nail polish bottle, dab about five to 10 drops near the first pool of the nail polish.

Start out with only a few drops of each nail polish color so you don't waste polish if you don’t like the mixture., Use a toothpick to drag a little bit of both colors into the middle area between them, and gradually mix the two colors together.Mix in a little bit at a time until you get the color you want.

If you want a swirl of color, stop mixing before they're completely combined.

Once you’re satisfied with the mixture, consider writing down how much of each color you used so you can make it again later. , This step is optional, but you can make your nail polish lighter or darker by adding a drop at a time of either the lighter color used to make the mixture, or the darker color.Consider adding a drop of white nail polish to make the mixture even lighter.

However, avoid adding a drop of black nail polish to make the mixture darker, since the black will make the entire mixture have a black shading once it’s mixed in.

For a more sheer appearance, mix in a drop or two of clear nail polish. , Remove the nail polish brush from the darker polish used to make the mixture.

Wipe the sides of the brush on the inside of the nail polish bottom to remove any excess nail polish from the brush.

Soak a cotton ball in nail polish remover.

Fold the cotton ball over the brush and rub the cotton ball to remove the nail polish from the brush.

Once most of the nail polish is removed from the brush, inspect the bristles of the brush and pull off any cotton fibers.

You don’t want stringy fibers getting stuck on your nails as you paint them.

Use the darker color’s nail polish brush to apply the mixed nail polish onto your nails.

When you put the brush back into the bottle the mixed polish is less likely to contaminate the color of the darker polish than the lighter polish. , Once you've achieved the color you want, paint your nails as usual with polish mixture.

Once the polish is dried on your nails, apply a top coat of clear nail polish to protect your nails and make the polish last longer.If your mixing surface was disposable like a paper plate or a sheet of wax paper, throw it out in the garbage can.

If you used something like a plastic palette, use nail polish remover and a cotton ball to take off the nail polish, and wash the palette with soap and water.

About the Author

V

Victoria Morales

Creates helpful guides on cooking to inspire and educate readers.

37 articles
View all articles

Rate This Guide

--
Loading...
5
0
4
0
3
0
2
0
1
0

How helpful was this guide? Click to rate: