How to Make a Pumpkin Drink Dispenser
Select the pumpkin., Wash the pumpkin., Wash the beverage canister. , Mark the pumpkin., Carve a lid for the pumpkin using the marker as an outline., Carve the spigot hole using the marker as an outline., Remove the pumpkin’s lid. , Scoop out the...
Step-by-Step Guide
-
Step 1: Select the pumpkin.
Choose a ripe pumpkin that is not bruised, blemished, or discolored.
Make sure the pumpkin is of adequate size. -
Step 2: Wash the pumpkin.
Use a washcloth and dish soap, cleaning off any excess dirt. ,, Using your beverage canister as a guide, mark a template of appropriate size at the top of the pumpkin around the stem.
Use the spigot as a template to mark a large enough hole near the base of the pumpkin. , Make sure the lid is large enough to accommodate the size of your beverage canister.
Always cut away from yourself and in the opposite direction of other living things. , Always cut away from yourself and in the opposite direction of other living things. ,, Using a scoop or large spoon, scoop out the pumpkin's interior until it is hollow. ,, If desired, you can use the pumpkin's inner material to make pumpkin pie, roast pumpkin seeds, or make a pumpkin beverage. , If desired, paint the pumpkin or carve out a design now.
If not, proceed to the next section. , Fold the container slightly and insert it through the top of the pumpkin. ,, Make sure the pumpkin and canister are upright to avoid spilling the liquid. ,,, -
Step 3: Wash the beverage canister.
-
Step 4: Mark the pumpkin.
-
Step 5: Carve a lid for the pumpkin using the marker as an outline.
-
Step 6: Carve the spigot hole using the marker as an outline.
-
Step 7: Remove the pumpkin’s lid.
-
Step 8: Scoop out the inside of the pumpkin.
-
Step 9: Remove the plug for the spigot.
-
Step 10: Use or dispose of the pumpkin’s inner material.
-
Step 11: Add decorations.
-
Step 12: Insert the beverage canister into the pumpkin.
-
Step 13: Align the hole in the beverage canister with the bottom hole in the pumpkin.
-
Step 14: Turn the pumpkin on its side and fill the canister with a beverage.
-
Step 15: Screw on the spigot to seal the beverage canister.
-
Step 16: Replace the pumpkin with the lid created earlier.
-
Step 17: Enjoy!
Detailed Guide
Choose a ripe pumpkin that is not bruised, blemished, or discolored.
Make sure the pumpkin is of adequate size.
Use a washcloth and dish soap, cleaning off any excess dirt. ,, Using your beverage canister as a guide, mark a template of appropriate size at the top of the pumpkin around the stem.
Use the spigot as a template to mark a large enough hole near the base of the pumpkin. , Make sure the lid is large enough to accommodate the size of your beverage canister.
Always cut away from yourself and in the opposite direction of other living things. , Always cut away from yourself and in the opposite direction of other living things. ,, Using a scoop or large spoon, scoop out the pumpkin's interior until it is hollow. ,, If desired, you can use the pumpkin's inner material to make pumpkin pie, roast pumpkin seeds, or make a pumpkin beverage. , If desired, paint the pumpkin or carve out a design now.
If not, proceed to the next section. , Fold the container slightly and insert it through the top of the pumpkin. ,, Make sure the pumpkin and canister are upright to avoid spilling the liquid. ,,,
About the Author
Jeffrey Powell
Enthusiastic about teaching hobbies techniques through clear, step-by-step guides.
Rate This Guide
How helpful was this guide? Click to rate: