How to Raise a Woolly Bear

Find a small plastic cup with a lid., Put enough soil in the cup to cover the bottom of the cup., Tear up some leaves that you've found on the ground and place them inside the cup. , Find some twigs and lay them in the cup., Lay some fresh grass in...

18 Steps 2 min read Advanced

Step-by-Step Guide

  1. Step 1: Find a small plastic cup with a lid.

    Poke a few holes toward the top of the cup and in the lid for air.

    Alternately, you could buy a special butterfly habitat, but it will work either way.
  2. Step 2: Put enough soil in the cup to cover the bottom of the cup.

    The woolly bear likes to hibernate in the soil. ,, You also may want to make 2 or 3 twigs stand up against the sides of the cup so the woolly bear can climb up the twigs.

    Just make sure they aren't big enough for the woolly bear to crawl out of the cup. ,, Only put in a maximum of 2 in a cup because in their later stages, they do not like to have much company.

    Just keeping one by itself is great for him. , Do this every 3 days.

    It's okay if you spray the woolly bear, too.

    You will find that if you are putting enough water in the cup, he will start getting a black band if he doesn't have one already, or if he does have a black band, his black band will expand or stay the same.

    If his black band is smaller, it should get bigger if he's drinking enough water. ,, Leave the lid of the cup just laying on top of the cup, but not sealed.

    A woolly bear cannot lift the lid, but a moth can. , He cannot survive in a cage. ,
  3. Step 3: Tear up some leaves that you've found on the ground and place them inside the cup.

  4. Step 4: Find some twigs and lay them in the cup.

  5. Step 5: Lay some fresh grass in the cup.

  6. Step 6: Find a woolly bear

  7. Step 7: and place it in the cup.

  8. Step 8: Using a spray bottle

  9. Step 9: spray about only 1 squirt of water in the cup.

  10. Step 10: IF YOU PLAN to RAISE HIM INTO A MOTH

  11. Step 11: READ ON!

  12. Step 12: He will start his 'moth process' in early spring

  13. Step 13: so in that time you should make a cage out of old window screens

  14. Step 14: and place the cup inside the cage.

  15. Step 15: Let the moth go outside.

  16. Step 16: Good luck with raising your new fun

  17. Step 17: interesting

  18. Step 18: and cool friend!

Detailed Guide

Poke a few holes toward the top of the cup and in the lid for air.

Alternately, you could buy a special butterfly habitat, but it will work either way.

The woolly bear likes to hibernate in the soil. ,, You also may want to make 2 or 3 twigs stand up against the sides of the cup so the woolly bear can climb up the twigs.

Just make sure they aren't big enough for the woolly bear to crawl out of the cup. ,, Only put in a maximum of 2 in a cup because in their later stages, they do not like to have much company.

Just keeping one by itself is great for him. , Do this every 3 days.

It's okay if you spray the woolly bear, too.

You will find that if you are putting enough water in the cup, he will start getting a black band if he doesn't have one already, or if he does have a black band, his black band will expand or stay the same.

If his black band is smaller, it should get bigger if he's drinking enough water. ,, Leave the lid of the cup just laying on top of the cup, but not sealed.

A woolly bear cannot lift the lid, but a moth can. , He cannot survive in a cage. ,

About the Author

K

Katherine Johnson

Brings years of experience writing about lifestyle and related subjects.

50 articles
View all articles

Rate This Guide

--
Loading...
5
0
4
0
3
0
2
0
1
0

How helpful was this guide? Click to rate: