How to Assemble a Unicycle

Step-by-Step Guide

1. 1

   Step 1: Attach the pedals to the cranks.

   The pedals should have a (L) for the left pedal and a (R) for the right.
2. 2

   Step 2: Make sure they are attached to the correct crank.

   ,, The frame of the unicycle must also be put on facing the correct direction, at the top of the frame where the seat post goes there is a small slit and a clip with two holes where the seat post clamp attaches, this is the back of the frame. ,,,,,,,,,,,,
3. 3

   Step 3: Be careful not to cross the thread.

4. 4

   Step 4: Attach the frame to the wheel.

5. 5

   Step 5: Pretend you're riding it

6. 6

   Step 6: when building the unicycle so your left and right sides don’t get mixed up.

7. 7

   Step 7: Make sure the frame is facing forward and the left pedal is on the left hand side.

8. 8

   Step 8: Attach the frame using the allen key bolts or the nuts and bolts provided.

9. 9

   Step 9: Attach the seat to the unicycle frame.

10. 10

    Step 10: Place the seat post into the unicycle frame.

11. 11

    Step 11: Insert the seat post clamp.

12. 12

    Step 12: Face the thinner end of the seat to the front.

13. 13

    Step 13: Tighten the seat post clamp bolt then push the leaver down to tighten even more.

14. 14

    Step 14: Check that the left crank is on the left hand side.

15. 15

    Step 15: Check the frame is facing forward.

16. 16

    Step 16: Check the thinner part of the seat is at the front.

17. 17

    Step 17: Learn more about Assembling your Unicycle here.

Detailed Guide

About the Author