How to Build a Homemade Xbox 360 Intercooler

Step-by-Step Guide

1. 1

   Step 1: Cut the end off of each fans’ wires

   If the fans have yellow or white wires, cut them completely off, as they are not needed.
   
   Cut off the end opposite to the outlet plug on the power adapter.
2. 2

   Step 2: leaving as much wire as possible.

   , Repeat with the black fan wires. ,,, If the fans are not working, unplug the power adapter and switch the red and black wires to the opposite power adapter wire. ,, Wrap the tape around the sides and top of the fans.
   
   TIP:
   Make sure both fans are blowing away from the cardboard. , The fans should fit snugly between the video and power cables. ,
3. 3

   Step 3: Strip about ¾ inch of coating off of each wire connected to both fans and the power adapter.

4. 4

   Step 4: Twist the red wires from each fan together.

5. 5

   Step 5: Twist and tape the red fan wires to the power adapter wire that has either letters or white stripes on it.

6. 6

   Step 6: Twist and tape the black fan wires to the remaining power adapter wire.

7. 7

   Step 7: Plug in power adapter to test that everything is working.

8. 8

   Step 8: Cut a piece of cardboard to have the dimensions of 6¼ inches by 4 inches (10.2 cm).

9. 9

   Step 9: Tape the fans onto the cardboard piece with a thin strip of duct tape.

10. 10

    Step 10: Fit the final product onto the back of the Xbox 360 by sliding the cardboard underneath the console.

11. 11

    Step 11: Finished.

Detailed Guide

About the Author