How to Build a Planter Box from Pallets
Refer to the plan for for dimensions and details., Find free pallets from Craigslist., Deconstruct the pallets., Select your wood., Cut wood and sand., Assemble top frame (nail and glue). , Assemble bottom platform (nail and glue). , Ready for next...
Step-by-Step Guide
-
Step 1: Refer to the plan for for dimensions and details.
If not available, you can purchase them locally for very little money.
When searching through the pallet stack, look for the pallets with the most usable wood.
The length of the slats is ~ 3 feet (0.9 m).
The thickness varies from ½ to ¾ thick.
The width of the slats can vary from
2.5 to 6 inches (6.4 to
15.2 cm). , Breaking the pallets apart takes a decent amount of work.
Use a jig or circular saw to cut the ends.
Pry the wood from the center support.
This should give you 8 to 14 boards per pallet.
Remove nails from slats. , Before you start cutting, determine the best pieces to get the desired width (see drawing).
If you have multiple long pieces with cracks and/or damage down one side, you can cut the damage off and still have usable pieces. , After cutting the pieces, sand them with course sandpaper to remove rough spots or major staining/paint…unless that is your desired look. ,,,,, Attach the side trim to the upper sides (nail and glue).
Attach the top trim (nail and glue). , This version shown is finished with red oak stain and coated with an outdoor urethane. , -
Step 2: Find free pallets from Craigslist.
-
Step 3: Deconstruct the pallets.
-
Step 4: Select your wood.
-
Step 5: Cut wood and sand.
-
Step 6: Assemble top frame (nail and glue).
-
Step 7: Assemble bottom platform (nail and glue).
-
Step 8: Ready for next step.
-
Step 9: Attach the sides to the top frame and bottom platform (nail & glue).
-
Step 10: Attach trim.
-
Step 11: Finish as desired.
-
Step 12: Final product!
Detailed Guide
If not available, you can purchase them locally for very little money.
When searching through the pallet stack, look for the pallets with the most usable wood.
The length of the slats is ~ 3 feet (0.9 m).
The thickness varies from ½ to ¾ thick.
The width of the slats can vary from
2.5 to 6 inches (6.4 to
15.2 cm). , Breaking the pallets apart takes a decent amount of work.
Use a jig or circular saw to cut the ends.
Pry the wood from the center support.
This should give you 8 to 14 boards per pallet.
Remove nails from slats. , Before you start cutting, determine the best pieces to get the desired width (see drawing).
If you have multiple long pieces with cracks and/or damage down one side, you can cut the damage off and still have usable pieces. , After cutting the pieces, sand them with course sandpaper to remove rough spots or major staining/paint…unless that is your desired look. ,,,,, Attach the side trim to the upper sides (nail and glue).
Attach the top trim (nail and glue). , This version shown is finished with red oak stain and coated with an outdoor urethane. ,
About the Author
Eric Vasquez
Professional writer focused on creating easy-to-follow organization tutorials.
Rate This Guide
How helpful was this guide? Click to rate: