How to Build an Aquarium Stand

Step-by-Step Guide

1. 1

   Step 1: Construct the frame's skeleton in a rectangular shape.

   Use #2 2-by-4 wood beams.
   
   Use a circular saw to cut the beams so they are large enough in width and length to fit your particular tank.
   
   Add .5 inch (1.3 cm) to ensure the tank does not slip off once placed.
   
   Hammer the beams together with wood finishing nails.
2. 2

   Step 2: Cut additional #2 2-by-4 wood beams to use as cross braces along the top of the frame.

   Space the beams at 2-foot (.6 m) intervals.
   
   These help distribute and hold the weight of the tank and water.
   
   Cut the beams to fit the rectangular frame, and hammer them together with more finishing nails. , Also use #2 2-by-4 wood beams, cut them to your specifications, and secure them to the frame with finishing nails. , For optimal results, use 8-by-12 wood screws.
   
   You may also use wood glue to cement the joint pieces to the frame. , Trace the exact shape and measurement with your pencil onto a piece of 4-by-8 wood sheeting, and use a jigsaw to cut out the shape.
   
   Install the panel in the bottom of the frame, and secure it with wood glue.
   
   You may also opt to use finishing nails to complete the installation.
3. 3

   Step 3: Install vertical posts for every corner and at the location of each cross brace.

4. 4

   Step 4: Screw wood joints to each of the frame corners with your power drill.

5. 5

   Step 5: Measure the bottom of your newly constructed frame.

Detailed Guide

About the Author