How to Build and Use a Small Greenhouse out of Transparent Corrugated Sheet

Step-by-Step Guide

1. 1

   Step 1: Assemble the supplies needed.

   Check the "Things You'll Need" list below.
2. 2

   Step 2: Cut and bend 3 mm iron wire to form 2 bows.

   Each bow has 5 loops as shown on the photo below.
   
   The distance between the two U shaped ends is about 1 cm (3/8 inch) larger than the width of the corrugated sheet used for the tunnel. , Use a bench vice. , Cover each handle and a part of the pen with plastic hose. , Use a knife or sharp scissors to cut each piece in longitudinal direction. , Two small plates of approx. 45 x 45 cm (18 x 18 inch) are needed.
   
   Or cut 4 narrow plates of about 25 x 45 cm (10 x 18 inch).
3. 3

   Step 3: Bend 8 iron pens each at about 8 to 10 cm (3 to 4 inches) from the end to form a handle.

4. 4

   Step 4: Cut 8 pieces of plastic hose

5. 5

   Step 5: length about 12 cm (5 inch).

6. 6

   Step 6: Cut 4 pieces of plastic hose

7. 7

   Step 7: length about 12 cm (5 inch).

8. 8

   Step 8: Use sharp scissors or a fine bladed hand saw to cut one corrugated sheet to size.

Detailed Guide

About the Author