How to Change Oil Using the EZ Oil Drain Valve

Step-by-Step Guide

1. 1

   Step 1: Put an oil drain pan under the oil pan drain hole.

   It may be a bit of a mess, but next time around, it won't be nearly so bad. , Make sure not to over-tighten the valve.
   
   If you have the straight or L-shaped hose end connections, screw these into the valve body and attach the hoses.
   
   This arrangement gives you added convenience. ,,,, Make sure the lever is secured in the locked position.
2. 2

   Step 2: Remove the original drain plug and drain the oil.

3. 3

   Step 3: Install the new valve and hand tighten

4. 4

   Step 4: then give an additional one-eighth turn using a small crescent wrench positioned on the flats of the valve body.

5. 5

   Step 5: Remove the old oil filter and install a new one.

6. 6

   Step 6: Close the lever on the EZ Drain Valve and refill with the recommended engine oil for your vehicle.

7. 7

   Step 7: Lift up the lever and turn it counter-clockwise to drain the oil the next time you change oil.

8. 8

   Step 8: Turn the lever back (clockwise) to close the valve before filling with fresh oil.

Detailed Guide

About the Author