How to Construct a Beer Bong

Step-by-Step Guide

1. 1

   Step 1: Choose the size and type of tubing you'd like to use.

   This could be as simple as a small, clear tube or you could choose a colored one.
   
   Get the tubing with the largest diameter that will fit in your mouth.
2. 2

   Step 2: Have the assistant at your local home improvement store cut you two pieces of the tube (you'll find out why soon enough)

   , Any basic funnel will do, but again, bigger is better.
   
   Make sure the funnel's spout is small enough, or the tubing is large enough, to be inserted into the tubing. , You need to make sure that both pieces will fit the size tubing you've chosen. , The valve allows you to pour the beer into the bong and hold it upright, allowing the air to escape without spilling any liquid. ,,,,,
3. 3

   Step 3: one about 1 foot (0.3 m) in length and the other a solid 4 or 5 feet (1.2 or 1.5 m).

4. 4

   Step 4: Pick up your beer bong's crown

5. 5

   Step 5: the funnel.

6. 6

   Step 6: Get the clamps and valve.

7. 7

   Step 7: Place one end of the valve into the small piece of tubing and the other into the larger piece.

8. 8

   Step 8: Take your clamps and fasten each end of the valve tightly into the tubing.

9. 9

   Step 9: Next insert the funnel into the short piece of tubing

10. 10

    Step 10: opposite the valve

11. 11

    Step 11: secure with clamp.

12. 12

    Step 12: pour some beer and enjoy!

13. 13

    Step 13: You can adjust chug of beer by adjusting the valve!

14. 14

    Step 14: Finished.

Detailed Guide

About the Author