How to Replace a Furby Speaker

Step-by-Step Guide

1. 1

   Step 1: Get a donor Furby.

   Go on eBay and search "1998 Furby not working." They should be rather cheap, being that they don't work.
   
   You will be using the broken Furby's speaker. ,, Unscrew these screws and carefully remove the tickle sensor and speaker., Unplug the plug from the socket., Unplug that as well.
   
   Now cut the glue holding the wires in and carefully remove the tickle sensor and speaker from Furby's belly., Unplug both plugs and remove the speaker and tickle sensor., If you'd like, you can put the broken speaker into the donor Furby.,,
2. 2

   Step 2: Once your broken Furby arrives

3. 3

   Step 3: skin both of the Furbys.

4. 4

   Step 4: On both sides of the speaker and tickle sensor

5. 5

   Step 5: there should be 2 screws.

6. 6

   Step 6: There should be wires leading into a white plug on far side of the circuit board.

7. 7

   Step 7: There should also be another white plug to the left of this one.

8. 8

   Step 8: Do the same with your donor Furby.

9. 9

   Step 9: Replug both the wires of the working speaker into the mute Furby.

10. 10

    Step 10: Put the shell and fur back on both Furbys.

11. 11

    Step 11: When batteries are put back into the mute Furby

12. 12

    Step 12: it will have a brand new voice!

Detailed Guide

About the Author