How to Replace Skateboard Bearings

Step-by-Step Guide

1. 1

   Step 1: Obtain the correct replacement bearings for your wheels.

   Your local skateboard shop should be able to help.
2. 2

   Step 2: Remove the wheels with a ratchet or skate tool.

   Put the two washers and nut from the wheel in a bag or other small container so you do not lose them. ,, If you're going to throw the bearings away anyway, you don't need to be too delicate with them, but try not to damage the wheel in the process. ,,,,,,,,,
3. 3

   Step 3: Put the first bearing on the edge of the axle of the truck.

4. 4

   Step 4: Slowly pry the bearing off.

5. 5

   Step 5: Repeat the process for the bearing on the other side of the wheel.

6. 6

   Step 6: Repeat for the other wheels.

7. 7

   Step 7: Drop the new bearings into the hole in the wheel or directly on the truck

8. 8

   Step 8: whichever will make it easier in attaching the bearings.

9. 9

   Step 9: Put the wheel onto the truck of the skateboard and press down on the wheel to press the bearing into place.

10. 10

    Step 10: Put the bearing spacer inside the wheel on the other side.

11. 11

    Step 11: Repeat the process to press the second bearing into place.

12. 12

    Step 12: Repeat for the other wheels.

13. 13

    Step 13: Replace the wheel washers and nut

14. 14

    Step 14: making sure they are secure.

15. 15

    Step 15: Go skateboarding.

Detailed Guide

About the Author