How to Replace the Bulb of a LED Reading Light
Remove the mental ring cover in anticlockwise., Hold the inside socket in one hand and pull out the burnt out bulb in other hand., , > , Replace the old bulb with the new one., Push all the inner devices into the lamp body. , Press down the mental...
Step-by-Step Guide
-
Step 1: Remove the mental ring cover in anticlockwise.
After removing there should be a socket with two fixing holds exposed, clear up the dust inside. ,,, Gently plug the alternative to the fixing holes.
But ensure all the pins should be invisible from outside in case of poor connection. ,, Confirm that the spring hoop is embedded inside the cover.
Properly rotating the cover in clockwise will do help to tighten the cover. ,, -
Step 2: Hold the inside socket in one hand and pull out the burnt out bulb in other hand.
-
Step 3: Replace the old bulb with the new one.
-
Step 4: Push all the inner devices into the lamp body.
-
Step 5: Press down the mental cover on the lamp top.
-
Step 6: Finished.
Detailed Guide
After removing there should be a socket with two fixing holds exposed, clear up the dust inside. ,,, Gently plug the alternative to the fixing holes.
But ensure all the pins should be invisible from outside in case of poor connection. ,, Confirm that the spring hoop is embedded inside the cover.
Properly rotating the cover in clockwise will do help to tighten the cover. ,,
About the Author
Kayla Henderson
Specializes in breaking down complex lifestyle topics into simple steps.
Rate This Guide
How helpful was this guide? Click to rate: