How to Set an Alarm on a Baby G Watch

Step-by-Step Guide

1. 1

   Step 1: Name the button in the top left corner A

   You should end up on a setting that has the letters 'AL' at the top and a picture of a bell. , Baby-G watches have five of these slots.
   
   Start with '1' and go up one by one as you add more alarms. , There should now be a few numbers flashing on your screen. , The hours are the furthest to the left and you will know that you are on it when these numbers are flashing.
   
   Same for the minutes, but on the far right. , Click on 'B' to add more hours and 'D' to take them away until you get the amount of hours that you want. ,, You will now only be viewing the alarm. , If it is lit, the alarm is on. ,
2. 2

   Step 2: the top right corner is called B

3. 3

   Step 3: the bottom left be C and the bottom right be D.;

4. 4

   Step 4: Name the watch at the bottom middle 'L' for 'Light'.

5. 5

   Step 5: Click 'C'

6. 6

   Step 6: or the mode button

7. 7

   Step 7: 4 times.

8. 8

   Step 8: Click on 'D' until you find an unused slot that you wish to place your alarm in.

9. 9

   Step 9: Hold down on 'A' until your watch beeps once.

10. 10

    Step 10: Click on 'C' to switch between hours and minutes.

11. 11

    Step 11: Choose what hour you want the alarm to go off at.

12. 12

    Step 12: Swap to the minutes and use the same technique as you did for changing the hours to set the minutes time.

13. 13

    Step 13: Click on 'A' to take it off changing mode.

14. 14

    Step 14: Click on 'B' to turn the alarm on if it is not already on.You can tell if it is on by looking at the light below 'ALM'.

15. 15

    Step 15: Click on 'C' until you get back to the homepage

16. 16

    Step 16: and your alarm is set!

Detailed Guide

About the Author