How to Make a Light Controller
Buy or obtain a PLC unit, preferably one that is easy to use., Cut and trim back the outer covering of your AC power cord., Screw down tight. , Connect the black and white wires from your AC power cord onto the terminal headers as shown.
Step-by-Step Guide
-
Step 1: Buy or obtain a PLC unit
In this example we'll use the CUSB 22-R. -
Step 2: preferably one that is easy to use.
Find 3 wires inside, one green, one black, and one white.
Splice all three wires.
Hook up the green wire to the CuSB where its labeled "FG"
which is frame ground. ,, Black and White wires do not have polarity, so you can put either or onto the CUSB labels, N and L.
Leave these wires unscrewed or loose for the moment. -
Step 3: Cut and trim back the outer covering of your AC power cord.
-
Step 4: Screw down tight.
-
Step 5: Connect the black and white wires from your AC power cord onto the terminal headers as shown.
Detailed Guide
In this example we'll use the CUSB 22-R.
Find 3 wires inside, one green, one black, and one white.
Splice all three wires.
Hook up the green wire to the CuSB where its labeled "FG"
which is frame ground. ,, Black and White wires do not have polarity, so you can put either or onto the CUSB labels, N and L.
Leave these wires unscrewed or loose for the moment.
About the Author
Ann Russell
Enthusiastic about teaching cooking techniques through clear, step-by-step guides.
Rate This Guide
How helpful was this guide? Click to rate: