How to Build a Slosh Pipe and Get a Killer Core
Gather necessary parts., Assemble the slosh pipe., Put on other end cap- ensure a tight fit. , Measure for center of pipe and mark with tape around pipe. , Try to lift slosh pipe.
Step-by-Step Guide
-
Step 1: Gather necessary parts.
You will need to go to Home Depot or your local hardware store for most of these parts. -
Step 2: Assemble the slosh pipe.
Put one end cap onto pipe- ensure a tight fit.
Fill halfway with water (40 lbs +/- TOTAL WEIGHT should be the final weight of the slosh pipe). ,,, Your goal is to maintain perfect stability Due to the nature of moving water this will NOT be an easy task -
Step 3: Put on other end cap- ensure a tight fit.
-
Step 4: Measure for center of pipe and mark with tape around pipe.
-
Step 5: Try to lift slosh pipe.
Detailed Guide
You will need to go to Home Depot or your local hardware store for most of these parts.
Put one end cap onto pipe- ensure a tight fit.
Fill halfway with water (40 lbs +/- TOTAL WEIGHT should be the final weight of the slosh pipe). ,,, Your goal is to maintain perfect stability Due to the nature of moving water this will NOT be an easy task
About the Author
Charlotte Turner
Brings years of experience writing about hobbies and related subjects.
Rate This Guide
How helpful was this guide? Click to rate: