How to Make Corn Stalk Decorations
Procure a roll of brown Kraft paper.,Unroll at least a six foot length of paper., Curl the sheet into a roll about one and a half to two inches in outer diameter with an inside diameter of at least one inch (two finger widths)., Make three eight...
Step-by-Step Guide
-
Step 1: Procure a roll of brown Kraft paper.
The roll should be 24" tall, available at Office Depot on clearance for $3.
The label says 40LB Kraft Roll 24 in. x 900 feet (274.3 m). 47002-OD.
Use the technique with that.
The result will look fantastic and be six foot tall. ,, Make at least 11 turns.
You can use up to 20 turns-- any more and you cannot complete cuts. ,, (Rubber bands should also work.),,, -
Step 2: Unroll at least a six foot length of paper.
-
Step 3: Curl the sheet into a roll about one and a half to two inches in outer diameter with an inside diameter of at least one inch (two finger widths).
-
Step 4: Make three eight inch cuts down from the top evenly spaced around the sleeve.
-
Step 5: Secure the bottom with glue.
-
Step 6: Twist the paper a bit
-
Step 7: then pull the sleeve out from the top.
-
Step 8: Spray paint as desired with deep fall colors.
-
Step 9: Make 30 or so and bind them at the top and flare at the bottom to make tepee shaped corn stands as a fall church decoration.
Detailed Guide
The roll should be 24" tall, available at Office Depot on clearance for $3.
The label says 40LB Kraft Roll 24 in. x 900 feet (274.3 m). 47002-OD.
Use the technique with that.
The result will look fantastic and be six foot tall. ,, Make at least 11 turns.
You can use up to 20 turns-- any more and you cannot complete cuts. ,, (Rubber bands should also work.),,,
About the Author
Eric Clark
Professional writer focused on creating easy-to-follow creative arts tutorials.
Rate This Guide
How helpful was this guide? Click to rate: