How to Clean Faux Wood Blinds

Dust once a week with a feather duster or microfiber cloth., Use a vacuum with a brush attachment.Attach the brush attachment to the hose of your vacuum cleaner., Flip the blinds the opposite direction., Remove stubborn dust with a mild detergent...

4 Steps 2 min read Medium

Step-by-Step Guide

  1. Step 1: Dust once a week with a feather duster or microfiber cloth.

    For routine dusting, start by closing the blinds completely.

    Run a feather duster or dry microfiber cloth over each slat, starting at the top corner and working your way down to the bottom slat.

    Open the blinds again and then close them in the opposite direction.

    Use the cloth to dust the slats on the other side.

    Run a dryer sheet over the slats every couple of days to prevent dust from sticking to them.Avoid pushing dust into the cords running through the slats.
  2. Step 2: Use a vacuum with a brush attachment.Attach the brush attachment to the hose of your vacuum cleaner.

    Close the blinds face down.

    Use one hand to hold the edge of the blinds steady, and use the other to vacuum.

    Start at the top corner and run the brush attachment from one side of the slat to the other.

    One pass is usually enough but, for extra dirty blinds, run the brush attachment back and forth across the slat.

    Move down to the next slat and repeat the same actions.

    Use the vacuum’s lowest setting.

    Too much suction can twist or damage the slats., After working your way down to the bottom of the first side with the brush attachment, flip the blinds so they’re facing the opposite direction.

    Start at the top again with the brush attachment and work your way down to the last slat.

    After you’ve cleaned all the slats, lift the blinds up and vacuum along the windowsill underneath them. , Sometimes dust is too thick to whisk it away with a feather duster.

    If you live in a very humid climate, dust may settle on your blinds and stick to them.

    In these situations, mix a small amount of warm water with a mild detergent.

    Slightly dampen a microfiber cloth with the cleaning solution (don’t soak the cloth, you only need a small amount) and run it over each slat.Close the blinds in the opposite direction and repeat the same actions.

    Gently blot the slats with a dry microfiber cloth.
  3. Step 3: Flip the blinds the opposite direction.

  4. Step 4: Remove stubborn dust with a mild detergent and microfiber cloth.

Detailed Guide

For routine dusting, start by closing the blinds completely.

Run a feather duster or dry microfiber cloth over each slat, starting at the top corner and working your way down to the bottom slat.

Open the blinds again and then close them in the opposite direction.

Use the cloth to dust the slats on the other side.

Run a dryer sheet over the slats every couple of days to prevent dust from sticking to them.Avoid pushing dust into the cords running through the slats.

Close the blinds face down.

Use one hand to hold the edge of the blinds steady, and use the other to vacuum.

Start at the top corner and run the brush attachment from one side of the slat to the other.

One pass is usually enough but, for extra dirty blinds, run the brush attachment back and forth across the slat.

Move down to the next slat and repeat the same actions.

Use the vacuum’s lowest setting.

Too much suction can twist or damage the slats., After working your way down to the bottom of the first side with the brush attachment, flip the blinds so they’re facing the opposite direction.

Start at the top again with the brush attachment and work your way down to the last slat.

After you’ve cleaned all the slats, lift the blinds up and vacuum along the windowsill underneath them. , Sometimes dust is too thick to whisk it away with a feather duster.

If you live in a very humid climate, dust may settle on your blinds and stick to them.

In these situations, mix a small amount of warm water with a mild detergent.

Slightly dampen a microfiber cloth with the cleaning solution (don’t soak the cloth, you only need a small amount) and run it over each slat.Close the blinds in the opposite direction and repeat the same actions.

Gently blot the slats with a dry microfiber cloth.

About the Author

C

Christina Mitchell

Committed to making crafts accessible and understandable for everyone.

65 articles
View all articles

Rate This Guide

--
Loading...
5
0
4
0
3
0
2
0
1
0

How helpful was this guide? Click to rate: