How to Clean up Latex Paint

Remove the paint while it is still wet., Use your fingernail if paint has dried., Use your hose and a wire brush., Put your brushes under running water.

4 Steps 2 min read Medium

Step-by-Step Guide

  1. Step 1: Remove the paint while it is still wet.

    Removing paint from CARPET is easily removed when paint is still wet with a stain remover.

    Spot Shot is a recommended brand of stain remover.

    Using a white rag, scrub off paint.

    Clean with water then repeat the steps with the stain remover.

    Depending on the spill this could take repeating several times until desired results are reached.

    If the paint is dried however, use Goof Off first to work loose and soften the paint then proceed with the stain remover.
  2. Step 2: Use your fingernail if paint has dried.

    Removing paint from HARD SURFACES is easily achieved by scraping with your fingernail or a plastic spatula/scraper.

    A latex paint remover, Goof Off, works well also.

    Apply to a rag and scrub and for tough spots apply letting it sit a minute or two so the remover will loosen the paint before scrapping with your fingernail or plastic scraper/spatula. , Removing latex paint from CONCRETE surfaces may be achieved with a water hose and wire brush.

    Spray concrete with water and then brush the affected area with a wire brush loosening the paint.

    Repeat these steps until desired look is achieved. , Remove latex paint from PAINT BRUSHES by running water over the brushes spreading the bristles apart under the faucet.

    Scrape any dried paint with fingernails or plastic scraper.

    Some Goof Off may be applied on tough spots but water should be used last to wash away any residue.

    A wire brush maybe used at will for tough areas.
  3. Step 3: Use your hose and a wire brush.

  4. Step 4: Put your brushes under running water.

Detailed Guide

Removing paint from CARPET is easily removed when paint is still wet with a stain remover.

Spot Shot is a recommended brand of stain remover.

Using a white rag, scrub off paint.

Clean with water then repeat the steps with the stain remover.

Depending on the spill this could take repeating several times until desired results are reached.

If the paint is dried however, use Goof Off first to work loose and soften the paint then proceed with the stain remover.

Removing paint from HARD SURFACES is easily achieved by scraping with your fingernail or a plastic spatula/scraper.

A latex paint remover, Goof Off, works well also.

Apply to a rag and scrub and for tough spots apply letting it sit a minute or two so the remover will loosen the paint before scrapping with your fingernail or plastic scraper/spatula. , Removing latex paint from CONCRETE surfaces may be achieved with a water hose and wire brush.

Spray concrete with water and then brush the affected area with a wire brush loosening the paint.

Repeat these steps until desired look is achieved. , Remove latex paint from PAINT BRUSHES by running water over the brushes spreading the bristles apart under the faucet.

Scrape any dried paint with fingernails or plastic scraper.

Some Goof Off may be applied on tough spots but water should be used last to wash away any residue.

A wire brush maybe used at will for tough areas.

About the Author

M

Michelle Perry

Creates helpful guides on cooking to inspire and educate readers.

44 articles
View all articles

Rate This Guide

--
Loading...
5
0
4
0
3
0
2
0
1
0

How helpful was this guide? Click to rate: