How to Make a Bathroom Cleaner
Make a basin, tub and tile cleaner., Remove mildew., Create drain cleaner., Sanitize the floor., Produce scouring powder., Create toilet bowl cleaner., Make glass/window cleaner.
Step-by-Step Guide
-
Step 1: Make a basin
Pour 1 and a half cups (192g) of baking soda into a spray bottle.
Add a half cup (118.3mL) of liquid soap, a half cup (118.3mL) of water and 2 tbsp (29.6mL) of white vinegar.
Close the top of the bottle and shake vigorously to mix the ingredients.
Spray the area to be cleaned and scrub with a towel or sponge. -
Step 2: tub and tile cleaner.
Pour a half cup (113.4g) of Borax and a half cup (118.3mL) of white vinegar into a shallow bowl.
Stir the mixture until it makes a thick paste.
Apply the recipe onto mold or mildew with a cleaning brush and scrub.
Allow the paste to sit on the mildew for 1 hour before rinsing it off. , Put a half cup (64g) of baking soda into the drain.
Follow that by pouring 1 cup (236.6mL) of white vinegar down the drain.
Wait for a reaction between the 2 components.
The vinegar will cause the baking soda to fizz.
Allow it to fizz for at least 15 minutes, and then pour a saucepan of boiling water down the drain.
Repeat this process more than once if the drain is still clogged or emits an odor. , Fill a bucket with at least 2 gallons (7.57L) of very hot water and a half cup (113.4g) of Borax.
Wipe the floor with a mop soaked in the mixture.
Do not rinse the floor with water; allow the Borax mixture to set. , Mix 1 cup (128g) of baking soda, 1 cup (128g) of Borax and 1 cup (128g) of salt into a small jar or container.
Sprinkle the powder on a specific area to be scoured and scrub with a sponge.
Scouring powder is a particularly abrasive cleaning substance that can easily remove grime and residue. , Pour 1/4 cup (32g) of baking soda into the toilet bowl followed by a 1/4 cup (59mL) of white vinegar.
Allow the mixture to sit in the bowl for a half hour before scrubbing with a toilet bowl brush and flushing. , Blend 1/4 cup (59mL) of white vinegar with at least 3 cups (710mL) of warm water in a spray bottle.
Shake the bottle well and spray the glass or window.
Wipe the surface with a dry towel. -
Step 3: Remove mildew.
-
Step 4: Create drain cleaner.
-
Step 5: Sanitize the floor.
-
Step 6: Produce scouring powder.
-
Step 7: Create toilet bowl cleaner.
-
Step 8: Make glass/window cleaner.
Detailed Guide
Pour 1 and a half cups (192g) of baking soda into a spray bottle.
Add a half cup (118.3mL) of liquid soap, a half cup (118.3mL) of water and 2 tbsp (29.6mL) of white vinegar.
Close the top of the bottle and shake vigorously to mix the ingredients.
Spray the area to be cleaned and scrub with a towel or sponge.
Pour a half cup (113.4g) of Borax and a half cup (118.3mL) of white vinegar into a shallow bowl.
Stir the mixture until it makes a thick paste.
Apply the recipe onto mold or mildew with a cleaning brush and scrub.
Allow the paste to sit on the mildew for 1 hour before rinsing it off. , Put a half cup (64g) of baking soda into the drain.
Follow that by pouring 1 cup (236.6mL) of white vinegar down the drain.
Wait for a reaction between the 2 components.
The vinegar will cause the baking soda to fizz.
Allow it to fizz for at least 15 minutes, and then pour a saucepan of boiling water down the drain.
Repeat this process more than once if the drain is still clogged or emits an odor. , Fill a bucket with at least 2 gallons (7.57L) of very hot water and a half cup (113.4g) of Borax.
Wipe the floor with a mop soaked in the mixture.
Do not rinse the floor with water; allow the Borax mixture to set. , Mix 1 cup (128g) of baking soda, 1 cup (128g) of Borax and 1 cup (128g) of salt into a small jar or container.
Sprinkle the powder on a specific area to be scoured and scrub with a sponge.
Scouring powder is a particularly abrasive cleaning substance that can easily remove grime and residue. , Pour 1/4 cup (32g) of baking soda into the toilet bowl followed by a 1/4 cup (59mL) of white vinegar.
Allow the mixture to sit in the bowl for a half hour before scrubbing with a toilet bowl brush and flushing. , Blend 1/4 cup (59mL) of white vinegar with at least 3 cups (710mL) of warm water in a spray bottle.
Shake the bottle well and spray the glass or window.
Wipe the surface with a dry towel.
About the Author
Victoria Wilson
Dedicated to helping readers learn new skills in creative arts and beyond.
Rate This Guide
How helpful was this guide? Click to rate: