How to Make a Tree Trunk Lamp

Step-by-Step Guide

1. 1

   Step 1: Find your fallen tree.

   Look specifically for a trunk or branch that will match and fit on top of your side table.
2. 2

   Step 2: Grab a hand saw.

   Cut a piece from the tree. ,, This is where you will make a hole to insert the parts of the broken lampshade. ,,,, Retain the inner parts of the lampshade.
   
   Usually its just a metal rod with the wiring leading to the bulb.
   
   Save the power switch as well. ,, Make sure the wiring goes out on the base of the trunk. , This will make the base stable and hide the wiring well. ,, Place the shade on top. , See how it lights up your home!
3. 3

   Step 3: Cut the branch about 6 to 8 inches (15.2 to 20.3 cm)

4. 4

   Step 4: depending on your preference.

5. 5

   Step 5: Mark the center of the trunk/branch with a pencil.

6. 6

   Step 6: Grab your drill and make the hole up the bottom.

7. 7

   Step 7: Get a sandpaper and start sanding the top of the trunk.

8. 8

   Step 8: Get you old or broken lamp and lampshade.

9. 9

   Step 9: Take the lamp apart.

10. 10

    Step 10: Clean the trunk (the body of your lamp).

11. 11

    Step 11: Insert the metal rod part of your broken lamp.

12. 12

    Step 12: Use a hammer and chisel to make a wire insert.

13. 13

    Step 13: Secure the bulb socket well on top of the trunk.

14. 14

    Step 14: Put a low watt bulb on the socket.

15. 15

    Step 15: Place it on your side table and turn it on.

Detailed Guide

About the Author