How to Paint a Computer Case

Step-by-Step Guide

1. 1

   Step 1: Open the side of your case.

   Remove all hard drive and CD/DVD ROM drive cables.
   
   Remove the necessary screws and remove the drives.
2. 2

   Step 2: Remove all expansion cards (PCI/AGP/PCI Express/etc)

   ,, Usually all the screws for it are on the back of the case.
   
   Sometimes, there are two on the inside of the case. , If possible also use sanding paper.
   
   This way the paint will adhere better. ,, A second coat may be applied along with a clear coat. ,
3. 3

   Step 3: then remove your power cable from your motherboard.

4. 4

   Step 4: Remove all screws from the motherboard and remove it from the case.

5. 5

   Step 5: Remove the power supply.

6. 6

   Step 6: Remove stickers

7. 7

   Step 7: Velcro

8. 8

   Step 8: Wipe down the case with a paper towel with rubbing alcohol on it.

9. 9

   Step 9: After alcohol dries

10. 10

    Step 10: spray an even coat over the entire case from 8–12 inches (20.3–30.5 cm) away.

11. 11

    Step 11: Reassemble computer.

Detailed Guide

About the Author