How to Plant with Two Row Planters
Keep your equipment in good working order., Purchase your seeds., Chose a specific plant variety that is acclimated to your growing region and conditions, and suits your taste., Prepare the soil for planting., Select the plates you will need to...
Step-by-Step Guide
-
Step 1: Keep your equipment in good working order.
The tractor needs regular maintenance to keep it working properly, and the planters, although simpler, also have moving parts that need attention periodically. -
Step 2: Purchase your seeds.
For large garden projects, buying from a seed store, or even a catalog seed company which sells seeds in bulk (by the ounce, pound, or even bushel) is far cheaper than buying prepackaged seed at a big box store. , You should determine the amount of seed you need by the linear feet of rows you intend to plant, and the proprietor of the seed store can help with this. , The soil may need to be subsoiled or bottom-plowed, but in most cases, simply harrowing with a disc-harrow will loosen the soil and turn any plant material into it, leaving a smooth, clean soil bed for cultivating. , Different crops have different sized seed, and these seeds are planted at different spacing, so the proper plates are needed to insure successful planting.
The crop being planted in the illustrations is English (Sweet) Peas, and they are spaced 1⁄2 inch (1.3 cm) apart.
This means the planter plates (the device that lifts the seeds from the seed box to the planting chute) will have a large number of notches.
These notches fill with the seed, then, as the drive chain turns the plates, they are deposited in the feed tube, which drops them into the furrow. , On two row planters, you should divide the seeds equally between the two seed boxes so each will continue planting until the seed runs out. , Simply raise the planter assembly with the three point hitch so the packing wheels clear the ground, and rotate these by hand.
When the packing wheels turn, the drive chain will rotate the seed plates, and you can count how many seeds are dropped during each revolution, then divide this number by the circumference of the packing wheel.
This will give you your seed spacing. , For the first pair of rows, you may want to establish a marker so the rows are laid out straight, but you may be able to use the edge of your garden patch or field to accomplish this. , As you begin to move, the packing wheels will turn the seed plates, and planting has begun. , Three point hitch assemblies have an adjustable link to raise or lower one side of the lift, so that even on ground that isn't level, the implement can be operated parallel to the ground. , This will insure the mechanism does not lurch or bind up, and the seeds do not bounce out of the notches in the plates. , After turning the tractor around, realign your front wheel in the center of the rear wheel track you made while planting the first two rows.
If your tractor wheel width is correctly set for your row width, this will maintain the correct space between the alternating rows as you plant two more alongside them.
Normal row spacing is 36 inches (91.4 cm) center to center, and so, tractor wheel centers should be set 72 inches (182.9 cm) apart. ,, Now may be a good time start thinking about fertilization, weed control, and pest control, while you await the first green sprouts to emerge. -
Step 3: Chose a specific plant variety that is acclimated to your growing region and conditions
-
Step 4: and suits your taste.
-
Step 5: Prepare the soil for planting.
-
Step 6: Select the plates you will need to plant with.
-
Step 7: Place your seeds in the seed boxes (the hoppers that hold them until the plates dispense them into the furrows).
-
Step 8: Test the seed placement spacing after you install the correct plates.
-
Step 9: Align your tractor on the rows you are going to plant.
-
Step 10: Drop the planters to the correct depth for the row openers and de-clutch your tractor.
-
Step 11: Stop after the first few feet to make sure each of the row openers are at the same depth
-
Step 12: and that they are covering the seeds correctly.
-
Step 13: Run your tractor at a modest uniform speed.
-
Step 14: Lift the planters up with the three point lift before turning around at the end of the row.
-
Step 15: Continue planting until you are finished
-
Step 16: checking occasionally to ensure the row openers are clear
-
Step 17: there are seeds left in the seed box
-
Step 18: and the chains and plates are operating freely and smoothly.
-
Step 19: Clean the seed boxes out and lubricate the drive chains when the planting operation is complete.
Detailed Guide
The tractor needs regular maintenance to keep it working properly, and the planters, although simpler, also have moving parts that need attention periodically.
For large garden projects, buying from a seed store, or even a catalog seed company which sells seeds in bulk (by the ounce, pound, or even bushel) is far cheaper than buying prepackaged seed at a big box store. , You should determine the amount of seed you need by the linear feet of rows you intend to plant, and the proprietor of the seed store can help with this. , The soil may need to be subsoiled or bottom-plowed, but in most cases, simply harrowing with a disc-harrow will loosen the soil and turn any plant material into it, leaving a smooth, clean soil bed for cultivating. , Different crops have different sized seed, and these seeds are planted at different spacing, so the proper plates are needed to insure successful planting.
The crop being planted in the illustrations is English (Sweet) Peas, and they are spaced 1⁄2 inch (1.3 cm) apart.
This means the planter plates (the device that lifts the seeds from the seed box to the planting chute) will have a large number of notches.
These notches fill with the seed, then, as the drive chain turns the plates, they are deposited in the feed tube, which drops them into the furrow. , On two row planters, you should divide the seeds equally between the two seed boxes so each will continue planting until the seed runs out. , Simply raise the planter assembly with the three point hitch so the packing wheels clear the ground, and rotate these by hand.
When the packing wheels turn, the drive chain will rotate the seed plates, and you can count how many seeds are dropped during each revolution, then divide this number by the circumference of the packing wheel.
This will give you your seed spacing. , For the first pair of rows, you may want to establish a marker so the rows are laid out straight, but you may be able to use the edge of your garden patch or field to accomplish this. , As you begin to move, the packing wheels will turn the seed plates, and planting has begun. , Three point hitch assemblies have an adjustable link to raise or lower one side of the lift, so that even on ground that isn't level, the implement can be operated parallel to the ground. , This will insure the mechanism does not lurch or bind up, and the seeds do not bounce out of the notches in the plates. , After turning the tractor around, realign your front wheel in the center of the rear wheel track you made while planting the first two rows.
If your tractor wheel width is correctly set for your row width, this will maintain the correct space between the alternating rows as you plant two more alongside them.
Normal row spacing is 36 inches (91.4 cm) center to center, and so, tractor wheel centers should be set 72 inches (182.9 cm) apart. ,, Now may be a good time start thinking about fertilization, weed control, and pest control, while you await the first green sprouts to emerge.
About the Author
Shirley Sullivan
Experienced content creator specializing in lifestyle guides and tutorials.
Rate This Guide
How helpful was this guide? Click to rate: