How to Stain Mortar

Step-by-Step Guide

1. 1

   Step 1: Decide what color(s) to add to your mortar.

   Stain is translucent so you must consider what colors are already in the mortar and then decide what must be added to obtain the color you want.
   
   If you are disguising a repair or addition, what additional colors would make the new mortar match the old? If you just want a different look, what colors would give you the look you want? Be sure to consider how light or dark, strong or weak the colors should be.
   
   Don’t worry if you are not 100% certain about your decisions at this point.
2. 2

   Step 2: Choose a do-it-yourself masonry stain kit

   One manufacturer will accept digital pictures of the color you have and the color you want and then advise you about what to purchase and what mixture of colors is likely to work well for you.
   
   You should be able to develop a mix recipe that brings you close to the color you want. , If dirty, scrub with water and a brush.
   
   If necessary, use a cleaner recommended by your mortar distributor.
   
   Use harsh chemicals such as acid only when necessary. , Follow manufacturer’s directions regarding appropriate weather for staining. , Always wear gloves, safety glasses and old clothes when mixing and applying stain.
   
   Use tarps to protect nearby surfaces from spills.
   
   Keep rags and water handy to remove stain that might drip onto brick or stone where it doesn’t belong.
   
   Review the steps to take if stain mixture is spilled or splashed on your clothes, or on floors or walls. , Try the mixture you have chosen on a 2 to 3 inch length of mortar joint in an unnoticeable location.
   
   Let it dry.
   
   If it dries to a color you like, begin staining the entire project.
   
   If you don’t like the color, adjust the recipe.
   
   If you want help adjusting the recipe, send digital photos of the test and ask your kit manufacturer to advise you. , Use the 1 inch brush with Polyester bristles.
   
   Begin by stirring so you get in the habit of stirring with each dip.
   
   Then, drain the excess mixture from the brush by pushing it again the inside of the mixing cup on the side closest to your body. , If you are right-handed, start your row on the left side and pull the brush to the right.
   
   If you are left-handed, reverse the procedure.
   
   Stain the mortar above 4 to 5 bricks.
   
   Complete three to four rows above or below the first row. , When staining the vertical joints, keep the brush pointed slightly upwards.
   
   This will help prevent drips. , Try to overlap your strokes as little as possible. , Stain another group of horizontal and related vertical joints until the job is done. ,, To clean out cups and brushes, wash the cups and brushes out repeatedly until water runs clear.
   
   Follow manufacturer’s instructions regarding storing and disposing of stain mixture.
3. 3

   Step 3: and get help with an initial color mix recipe.

4. 4

   Step 4: Make sure your mortar is clean and dry.

5. 5

   Step 5: Wait until the temperature is above 40° Fahrenheit (4° Celsius).

6. 6

   Step 6: Protect yourself.

7. 7

   Step 7: Test the recipe.

8. 8

   Step 8: Prepare your chosen mixture according to the manufacturer’s directions

9. 9

   Step 9: and dip your brush.

10. 10

    Step 10: Start staining the bed (or horizontal) mortar joints with a smooth

11. 11

    Step 11: continuous

12. 12

    Step 12: pulling motion.

13. 13

    Step 13: Stain the head (or vertical) mortar joints that connect the rows you just stained with a single smooth stroke for each joint.

14. 14

    Step 14: Touch up any spots you missed.

15. 15

    Step 15: Dip the brush and repeat the process.

16. 16

    Step 16: Check your work carefully to make sure you’ve colored all the mortar.

17. 17

    Step 17: Clean up.

Detailed Guide

About the Author