How to Tile a Bathroom Floor
Purchase tiles., Purchase thin-set mortar and grout., Buy tools., Prepare the floor., Mix a batch of thin-set mortar., Spread a layer of thin-set on the sub-floor with the notched trowel., Cut the cement board to fit the space., Wait until the next...
Step-by-Step Guide
-
Step 1: Purchase tiles.
Buy a tile that's durable and aesthetically pleasing to you.
Purchase more tile than you'll need.
A good rule of thumb is to get 15% more tiles to account for tiles you may need to cut to fit in narrow spaces and tiles that will break in the shipping process.There are many different types of tile available:
Ceramic and porcelain tiles cost around a dollar per square foot and are attractive, long-lasting, and durable.
For that classic look in your bathroom, it's hard to beat ceramic or porcelain tiles.
Make sure the tile you purchase is rated for use on floors.
Vinyl tiles are also common, easy to install, and cheap.
It's also self-adhering, so you won't need anything beyond the tiles themselves to do it yourself.
Other kinds of tile will require more work and materials.
If you use vinyl, you won't need to buy anything else.
Just follow the adhering instructions on the package and following the alignment guidelines below.
Plastic laminate and linoleum tiles generally come in planks, rather than tiles, but are sometimes popular.
They are also more expensive, ranging upward of 4 dollars per square foot.
Other tiles made of wood, cork, stone, or glass are also available but tend to be more expensive.
These require other sorts of polyurethane coatings to avoid dings and dents, but are a good option if you like the look. -
Step 2: Purchase thin-set mortar and grout.
To lock the tiles in and create a solid floor for your bathroom, you'll need to first layer a thin amount of mortar to set the tiles and grout to connect them to one another.
Mortar usually comes in two varieties, pre-mix and unmixed mortar that comes in a box.
All you need to do to mix it is add water and the pre-mixed tubs are usually more expensive, but buy whichever variety works for you. , In addition to the tiles, mortar, and grout, you'll also need:
Measuring tape Cement board Utility knife 2 large buckets and a large sponge Notched trowel Hammer and roofing nails Tile cutter or wet saw Tile spacers Level, square, and chalk line Grout float and sealant Knee pads , Make sure the surface you're going to tile is swept and clean of any debris, especially if you're in the middle of more major renovations or construction.
Make certain the existing floor is flat, solid, and well bonded to the sub-floor.
The floor and subfloor together should be at least 1-1/8" thick. , Follow the manufacturer directions, mixing the appropriate amount of water with the mortar in a bucket.
The mortar should be thick, a similar consistency to mud, but not so thick that is doesn't fall off a trowel.Don't mix more thin-set than you can use within an hour, or it will begin to dry out. , Spread the mortar quickly, but also evenly.
Use firm sweeping motions with the trowel. , If you want to reinforce the floor with cement board, score it with a utility knife before laying it over the thin-set mortar.
Pound in roofing nails along the edge to secure the backer board to the floor.
Continue until the floor is covered and apply a thin layer of thin-set mortar over the joints. , In the meantime, you can prepare the reference lines to make sure the tile will be laid evenly. , If you simply start laying tile along a crooked wall, it will look really crooked by the time you reach the opposite wall, so you need to use a mason's chalk line (a piece of string covered with chalk dust that you can snap into place) to establish easily-removable reference lines.Identify the most visible wall when you walk into the room.
This is the wall with the longest area of continuous tile.
Determine a 90-degree angle from that wall, using a square, and snap a chalk line across the room.
Use the square again to mark a perfect 90-degree angle from that chalk line and snap another chalk line that's perpendicular to the first one.
Now you have two intersecting chalk lines as a reference to lay the first tile. , Shift the tiles, if needed, so any cuts that must be made by the wall are against the least noticeable wall.
You also don't want cut tiles at the entrance to the bathroom, so adjust the tiles so cuts are against the far wall.
You can snap additional chalk reference lines, once the tile layout is finalized, if you wish. , You won't want to step on the newly laid tile before the mortar has a chance to dry.
Work on laying the tile in small sections at a time.
Mix up a small batch of thin-set mortar and spread a thin layer on the cement board with the notched trowel.
Lay several pieces of tile with tile spacers to establish even grout lines.
Firmly press the tile into the mortar so there are no air bubbles underneath.
Set a level across the top of the tiles to make sure they are perfectly flat. , As you work toward the walls, you may not be able to use a perfect number of tiles.
You may also need to make cuts for tiles that sit around toilets and other rounded objects in the floor. , Follow the instructions recommended by the manufacturer before grouting. , Mix the sanded grout with water in a bucket, according to the manufacturer directions. , Firmly press it into the grout lines with the grout float, working in small sections at a time.
Remove the excess grout from the surface of the tile before it has a chance to dry.
Fill a second bucket with water and use it to wet the large sponge with rounded corners.
Wring out the sponge and then wipe over the tile so that you are moving at a diagonal to the grout lines.
If you wipe parallel to the grout lines, you might gouge out some of the grout and leave an uneven surface.
Rinse the sponge in the bucket of water and repeat until all the grout is removed from the surface of the tile. , Sometimes its smart to leave a humidifier on during the two days you're letting it sit, to help the grout gain in strength. -
Step 3: Buy tools.
-
Step 4: Prepare the floor.
-
Step 5: Mix a batch of thin-set mortar.
-
Step 6: Spread a layer of thin-set on the sub-floor with the notched trowel.
-
Step 7: Cut the cement board to fit the space.
-
Step 8: Wait until the next day to begin laying tile.
-
Step 9: Establish a straight vertical and horizontal reference line from the center of the room.
-
Step 10: Lay out a single horizontal and vertical row of tiles across the floor along the chalk reference lines.
-
Step 11: Set the first tile in the far corner of the room and work towards the doorway.
-
Step 12: Cut tiles with a tile cutter or wet saw
-
Step 13: if necessary
-
Step 14: to fit along the wall.
-
Step 15: Allow the thin-set to dry for at least a day.
-
Step 16: Pull the tile spacers out from between the tiles before adding grout.
-
Step 17: Scoop some grout onto the file floor with a trowel.
-
Step 18: Wait at least 2 days for the grout to cure before sealing it.
Detailed Guide
Buy a tile that's durable and aesthetically pleasing to you.
Purchase more tile than you'll need.
A good rule of thumb is to get 15% more tiles to account for tiles you may need to cut to fit in narrow spaces and tiles that will break in the shipping process.There are many different types of tile available:
Ceramic and porcelain tiles cost around a dollar per square foot and are attractive, long-lasting, and durable.
For that classic look in your bathroom, it's hard to beat ceramic or porcelain tiles.
Make sure the tile you purchase is rated for use on floors.
Vinyl tiles are also common, easy to install, and cheap.
It's also self-adhering, so you won't need anything beyond the tiles themselves to do it yourself.
Other kinds of tile will require more work and materials.
If you use vinyl, you won't need to buy anything else.
Just follow the adhering instructions on the package and following the alignment guidelines below.
Plastic laminate and linoleum tiles generally come in planks, rather than tiles, but are sometimes popular.
They are also more expensive, ranging upward of 4 dollars per square foot.
Other tiles made of wood, cork, stone, or glass are also available but tend to be more expensive.
These require other sorts of polyurethane coatings to avoid dings and dents, but are a good option if you like the look.
To lock the tiles in and create a solid floor for your bathroom, you'll need to first layer a thin amount of mortar to set the tiles and grout to connect them to one another.
Mortar usually comes in two varieties, pre-mix and unmixed mortar that comes in a box.
All you need to do to mix it is add water and the pre-mixed tubs are usually more expensive, but buy whichever variety works for you. , In addition to the tiles, mortar, and grout, you'll also need:
Measuring tape Cement board Utility knife 2 large buckets and a large sponge Notched trowel Hammer and roofing nails Tile cutter or wet saw Tile spacers Level, square, and chalk line Grout float and sealant Knee pads , Make sure the surface you're going to tile is swept and clean of any debris, especially if you're in the middle of more major renovations or construction.
Make certain the existing floor is flat, solid, and well bonded to the sub-floor.
The floor and subfloor together should be at least 1-1/8" thick. , Follow the manufacturer directions, mixing the appropriate amount of water with the mortar in a bucket.
The mortar should be thick, a similar consistency to mud, but not so thick that is doesn't fall off a trowel.Don't mix more thin-set than you can use within an hour, or it will begin to dry out. , Spread the mortar quickly, but also evenly.
Use firm sweeping motions with the trowel. , If you want to reinforce the floor with cement board, score it with a utility knife before laying it over the thin-set mortar.
Pound in roofing nails along the edge to secure the backer board to the floor.
Continue until the floor is covered and apply a thin layer of thin-set mortar over the joints. , In the meantime, you can prepare the reference lines to make sure the tile will be laid evenly. , If you simply start laying tile along a crooked wall, it will look really crooked by the time you reach the opposite wall, so you need to use a mason's chalk line (a piece of string covered with chalk dust that you can snap into place) to establish easily-removable reference lines.Identify the most visible wall when you walk into the room.
This is the wall with the longest area of continuous tile.
Determine a 90-degree angle from that wall, using a square, and snap a chalk line across the room.
Use the square again to mark a perfect 90-degree angle from that chalk line and snap another chalk line that's perpendicular to the first one.
Now you have two intersecting chalk lines as a reference to lay the first tile. , Shift the tiles, if needed, so any cuts that must be made by the wall are against the least noticeable wall.
You also don't want cut tiles at the entrance to the bathroom, so adjust the tiles so cuts are against the far wall.
You can snap additional chalk reference lines, once the tile layout is finalized, if you wish. , You won't want to step on the newly laid tile before the mortar has a chance to dry.
Work on laying the tile in small sections at a time.
Mix up a small batch of thin-set mortar and spread a thin layer on the cement board with the notched trowel.
Lay several pieces of tile with tile spacers to establish even grout lines.
Firmly press the tile into the mortar so there are no air bubbles underneath.
Set a level across the top of the tiles to make sure they are perfectly flat. , As you work toward the walls, you may not be able to use a perfect number of tiles.
You may also need to make cuts for tiles that sit around toilets and other rounded objects in the floor. , Follow the instructions recommended by the manufacturer before grouting. , Mix the sanded grout with water in a bucket, according to the manufacturer directions. , Firmly press it into the grout lines with the grout float, working in small sections at a time.
Remove the excess grout from the surface of the tile before it has a chance to dry.
Fill a second bucket with water and use it to wet the large sponge with rounded corners.
Wring out the sponge and then wipe over the tile so that you are moving at a diagonal to the grout lines.
If you wipe parallel to the grout lines, you might gouge out some of the grout and leave an uneven surface.
Rinse the sponge in the bucket of water and repeat until all the grout is removed from the surface of the tile. , Sometimes its smart to leave a humidifier on during the two days you're letting it sit, to help the grout gain in strength.
About the Author
Jerry Nguyen
Writer and educator with a focus on practical creative arts knowledge.
Rate This Guide
How helpful was this guide? Click to rate: