How to Make a Parsnip Clarinet

Step-by-Step Guide

1. 1

   Step 1: Buy a parsnip.

   This can be bought at your local grocery store in the fresh produce section.
   
   The size you would approximately want is
   18.7cm in length and a diameter of
   1.2cm.
   
   Check that the parsnip are free of cracks, and avoid any that bend or show soft spots.
   
   A fresh parsnip will have an herbal fragrance.
2. 2

   Step 2: Go to a hardware store and get yourself a 1/2-inch PVC pipe.

   , These can be acquired at any music store that sells instruments or online. (The reed is attached to the mouthpiece, so no need to worry about buying it separately.) , Make sure to get rid of any pieces of the parsnip by blowing in it or washing it out. , Each hole should be
   1.5cm-1.7cm apart from each other. ,, Refrigerate for 24 hours. ,,, (This will amplify the sound, but its optional) Play your parsnip clarinet and notice the similar sounds it produces.
3. 3

   Step 3: Get yourself a clarinet mouthpiece.

4. 4

   Step 4: With the hand drill

5. 5

   Step 5: drill a hole from one end of the parsnip to the other end.

6. 6

   Step 6: Drill six holes on the side of the parsnip that mimics those of a clarinet.

7. 7

   Step 7: Drill one hole on the opposite side of the six already made holes where you will place your thumb.

8. 8

   Step 8: Put the parsnip in the refrigerator to harden.

9. 9

   Step 9: Put the 1/2inch PVC pipe inside the parsnip where the mouthpiece will be placed.

10. 10

    Step 10: Place the mouthpiece on the other end of the 1/2inch PVC pipe.

11. 11

    Step 11: Insert the funnel at the opposite end of the parsnip.

Detailed Guide

About the Author