How to Connect a Router to a Modem

Step-by-Step Guide

1. 1

   Step 1: Connect one end of the coaxial cable to your cable wall outlet.

   If your modem lacks a power switch, the modem will automatically turn on after it’s been connected to a power source. ,, This connection allows all devices in your home to connect to the Internet. ,,,,, This indicates that the devices have been properly connected to one another. , You will now have the ability to access the Internet from multiple devices in your home., This allows the modem to fully power down and initialize a fresh, stronger connection.
   
   After 15 seconds, reconnect the modem and wait at least two minutes before connecting to the Internet., In some cases, temporary service interruptions may occur on behalf of local maintenance or outages. , Some modems may be outdated or incompatible with the routers offered by your ISP. , This can help refresh both devices and ensure a stronger, lasting Internet connection.
   
   Power off your computer and unplug your modem from its power source.
   
   Unplug your router from its power source, then verify that both Ethernet cables and the coaxial cable are fastened securely to your devices.
   
   Reconnect the modem to its power source, then reconnect the router to its power source.
   
   Wait two minutes, then power on your computer.
   
   You should now be able to connect to the Internet. , Some cable modems must have their Ethernet ports configured before they can function properly with Internet routers., In most cases, frayed or faulty cables will prevent you from accessing the Internet.
2. 2

   Step 2: Connect the other end of the coaxial cable to the coaxial port on your modem.

3. 3

   Step 3: Connect the modem’s power cord to your modem.

4. 4

   Step 4: Plug the modem’s power cord into a nearby electrical outlet.

5. 5

   Step 5: Power on your modem.

6. 6

   Step 6: Connect one of the Ethernet cables into a port labeled “Ethernet” on the back of your modem.

7. 7

   Step 7: Connect the other end of the Ethernet cable into the port labeled “WAN” on your Internet router.

8. 8

   Step 8: Connect the router’s power cord to your router.

9. 9

   Step 9: Plug the router’s power cord into a nearby electrical outlet.

10. 10

    Step 10: Connect the second Ethernet cable into an open Ethernet port on your router.

11. 11

    Step 11: Connect the other end of the Ethernet cable into an open Ethernet port on your computer.

12. 12

    Step 12: Verify that the lights on your modem and router are lit up.

13. 13

    Step 13: Consult with your Internet Service Provider (ISP) directly to confirm your Internet service has been activated.

14. 14

    Step 14: Try unplugging your modem for 15 seconds if you are suddenly unable to connect to the Internet.

15. 15

    Step 15: Contact your ISP to verify whether there are any outages in your area if you experience an interruption in service.

16. 16

    Step 16: Contact your ISP to verify whether your modem is compatible with your router if you unable to establish a connection.

17. 17

    Step 17: Try restarting both your modem and router if you experience problems connecting to the Internet.

18. 18

    Step 18: Consult with your ISP about whether your modem requires special configuration if you are unable to connect to the Internet.

19. 19

    Step 19: Try switching out Ethernet cables and coaxial cables to rule out problems with faulty equipment if you are unable to connect to the Internet.

Detailed Guide

About the Author