How to Design a Rake Utensil Holder
Remove rake handle., Scrub rake, especially if you are recycling an old rake., Identify the area of the rake that can be mounted to the wall., Drill screw into an area you’ve marked on the wall.
Step-by-Step Guide
-
Step 1: Remove rake handle.
Determine the length of your rake holder and then saw off the handle using an electric saw.
Take safety precautions before using the electric saw and make one clean cut at the designated area.
Use sandpaper to soften the sawed off edges.
Polish with a soft cloth. -
Step 2: Scrub rake
Use liquid dish detergent and hot water to clean the rake.
Dry thoroughly before use. , Most likely the place where the handle began would be ideal.
Find a place on the wall that will hold the rake.
Consider marking that spot with a pencil. , Drill ¾ of the way into the wall leaving enough room to hold the rake.
Hang your utensils or glassware! -
Step 3: especially if you are recycling an old rake.
-
Step 4: Identify the area of the rake that can be mounted to the wall.
-
Step 5: Drill screw into an area you’ve marked on the wall.
Detailed Guide
Determine the length of your rake holder and then saw off the handle using an electric saw.
Take safety precautions before using the electric saw and make one clean cut at the designated area.
Use sandpaper to soften the sawed off edges.
Polish with a soft cloth.
Use liquid dish detergent and hot water to clean the rake.
Dry thoroughly before use. , Most likely the place where the handle began would be ideal.
Find a place on the wall that will hold the rake.
Consider marking that spot with a pencil. , Drill ¾ of the way into the wall leaving enough room to hold the rake.
Hang your utensils or glassware!
About the Author
Emma Reed
Dedicated to helping readers learn new skills in crafts and beyond.
Rate This Guide
How helpful was this guide? Click to rate: