How to Glaze a Pot
Choose your glaze., Buy your brushes., Remove rough spots., Clean the pot., Apply wax to the bottom of your pot., Choose your glaze container., Pour liquid glaze through a sieve., Add water to powdered glaze., Stir your glaze., Test your glaze...
Step-by-Step Guide
-
Step 1: Choose your glaze.
Glazes come in a variety of colors and consistencies.
They can come in liquid or powder form and can be specially formulated for specific application methods.
In other words, a dipping glaze is different from a glaze designed to be brushed or sponged onto your pot.You can buy pre-mixed glazes at your local pottery supplies store.
If you are just starting out as a potter, you will probably want to begin by buying pre-mixed glazes.
As you become more experienced with glazes, you might want to develop your own recipe based on how you want your pots to look and your favorite application method. -
Step 2: Buy your brushes.
Brushes come in various shapes and sizes and are meant to accomplish different tasks during the glazing process.
Thick brushes are useful for covering large areas, and thinner ones for small touch-up jobs.
If you buy a set you will have everything you need., If there is any excess clay or uneven patches left on your pot after the initial firing, you can smooth them out with sandpaper, a kitchen knife, or a dental tool.
Wear gloves while working with your pot to prevent contaminating it with any lotions or soaps that might be on your hands.
Be sure to work outside or in a well-ventilated area, and consider wearing a surgical mask as inhaling clay dust can be very bad for your lungs., Be sure to remove all dust or other material left over after the initial firing.
A pneumatic air compressor or canned air will do the most thorough job of removing dust, but you can also use a damp cloth or sponge.
If you use a cloth or sponge, be sure to let it dry before moving on in the glazing process., This step is designed to keep glaze off of the bottom of the pot.
If there is glaze on the bottom of your pottery it can stick to the kiln shelf during firing.You can buy wax resist products at your local pottery store that can be brushed onto the bottom of your pot, or you can dip the item into a pan of wax.
Allow 15 to 20 minutes for the wax to dry.If you don’t want to use wax, you can wipe off any glaze that gets onto the bottom of your pot with a sponge or a metal scraper.
Be sure to remove glaze from the foot of the pot, about one-quarter of an inch from the bottom, in case the glaze runs during firing., Plastic buckets or vats are ideal to hold your glaze, but the size of the item and the application method you intend to use can influence your choice of container.
If your item is small enough to dip into the glaze, choose a container that is deep enough to submerge the item completely.
Brushing or sponging requires less glaze, therefore you might use a smaller container., If you bought pre-mixed liquid glaze, pour it into your bucket or vat through a metal sieve to remove any lumps that have formed since it was packaged., Glazes that come as powders have to be mixed with water before use.
Pay close attention to the instructions to determine how much water to add.
Adding more or less water than recommended can change the consistency of the glaze.
As you become more experienced with glazing you might want to experiment with different consistencies, but the glaze you buy will probably work best by following the instructions listed on the package., Whether you are using liquid or powdered glaze, it will have to be vigorously stirred before use.
If you are using a liquid glaze, a whisk will probably suffice as a stirring tool.If using a powdered glaze, try using a stirring rod attached to a power drill to get the smoothest texture., Apply the mixed glaze to a test piece of pottery.
This test piece might be an item you have set aside specifically for this purpose, or it might be a leftover shard from a larger item.
Choose a test piece that closely resembles the item you are finishing.
This will provide the most reliable test.
After applying glaze to the test piece, allow it to dry.
The glaze will look slightly different dry than wet., Slowly pour glaze into your pot, and swirl the item around to ensure complete coverage., You will probably have poured more into your pot than you need to coat the inside, so you can remove the rest., If there are any spots that the glaze did not reach in the pouring process, fill them in using a brush.
You can remove excess glaze using a damp sponge or a paint scraper., If your item is small enough, pick it up with a pair of tongs and dip it straight into the bucket or vat of glaze until it is completely covered, remove it, and then clear excess glaze with a damp sponge, a brush, or a paint scraper.You can buy specialized glazing tongs at a pottery supply store.
If your tongs leave marks on the pot, touch them up by brushing them with glaze once you remove your item., If your item is too large to dip into the glaze but small enough to hold over the bucket or vat, you can pour it over the outside of your pot.
This will probably result in a thin layer outer layer of glaze., If your item is too large to move during the glazing process, apply the glaze with the tools at hand.
Use large brushes to cover the main parts of your pottery, and small brushes or a sponge to fill in the smaller areas.
Don’t dip your tools straight into the buckets or vats of glaze.
Put some of your glaze into a a cup or bowl, and dip your brush or sponge into the smaller vessel., Once you have a layer of glaze on your pottery, set it aside to let it dry.
You might want to apply a second layer of glaze to use multiple colors or create designs, but if you do so immediately after the first layer the colors might run together., You can add as many layers of glaze as you want, and mix up your colors as well as your brushing and sponging techniques to create unique designs., If you did not wax your pot, be sure to wipe any glaze off of the bottom with a sponge.
If you did wax your pot, remove any glaze that has gotten onto the dried wax., No matter how many layers of glaze you’ve added, you have to wait for the final layer to dry thoroughly before firing your pottery., Though you already fired it in the creation stage before you began the glazing process, you should fire it again once you are done. -
Step 3: Remove rough spots.
-
Step 4: Clean the pot.
-
Step 5: Apply wax to the bottom of your pot.
-
Step 6: Choose your glaze container.
-
Step 7: Pour liquid glaze through a sieve.
-
Step 8: Add water to powdered glaze.
-
Step 9: Stir your glaze.
-
Step 10: Test your glaze.
-
Step 11: Pour glaze into your pot.
-
Step 12: Pour out excess glaze.
-
Step 13: Touch up the interior of the pot.
-
Step 14: Dip your pot into the glaze.
-
Step 15: Pour on glaze.
-
Step 16: Apply glaze with a brush or sponge.
-
Step 17: Allow the glaze to dry.
-
Step 18: Add more layers of glaze.
-
Step 19: Remove any unwanted glaze.
-
Step 20: Allow the pot to dry.
-
Step 21: Fire your pot.
Detailed Guide
Glazes come in a variety of colors and consistencies.
They can come in liquid or powder form and can be specially formulated for specific application methods.
In other words, a dipping glaze is different from a glaze designed to be brushed or sponged onto your pot.You can buy pre-mixed glazes at your local pottery supplies store.
If you are just starting out as a potter, you will probably want to begin by buying pre-mixed glazes.
As you become more experienced with glazes, you might want to develop your own recipe based on how you want your pots to look and your favorite application method.
Brushes come in various shapes and sizes and are meant to accomplish different tasks during the glazing process.
Thick brushes are useful for covering large areas, and thinner ones for small touch-up jobs.
If you buy a set you will have everything you need., If there is any excess clay or uneven patches left on your pot after the initial firing, you can smooth them out with sandpaper, a kitchen knife, or a dental tool.
Wear gloves while working with your pot to prevent contaminating it with any lotions or soaps that might be on your hands.
Be sure to work outside or in a well-ventilated area, and consider wearing a surgical mask as inhaling clay dust can be very bad for your lungs., Be sure to remove all dust or other material left over after the initial firing.
A pneumatic air compressor or canned air will do the most thorough job of removing dust, but you can also use a damp cloth or sponge.
If you use a cloth or sponge, be sure to let it dry before moving on in the glazing process., This step is designed to keep glaze off of the bottom of the pot.
If there is glaze on the bottom of your pottery it can stick to the kiln shelf during firing.You can buy wax resist products at your local pottery store that can be brushed onto the bottom of your pot, or you can dip the item into a pan of wax.
Allow 15 to 20 minutes for the wax to dry.If you don’t want to use wax, you can wipe off any glaze that gets onto the bottom of your pot with a sponge or a metal scraper.
Be sure to remove glaze from the foot of the pot, about one-quarter of an inch from the bottom, in case the glaze runs during firing., Plastic buckets or vats are ideal to hold your glaze, but the size of the item and the application method you intend to use can influence your choice of container.
If your item is small enough to dip into the glaze, choose a container that is deep enough to submerge the item completely.
Brushing or sponging requires less glaze, therefore you might use a smaller container., If you bought pre-mixed liquid glaze, pour it into your bucket or vat through a metal sieve to remove any lumps that have formed since it was packaged., Glazes that come as powders have to be mixed with water before use.
Pay close attention to the instructions to determine how much water to add.
Adding more or less water than recommended can change the consistency of the glaze.
As you become more experienced with glazing you might want to experiment with different consistencies, but the glaze you buy will probably work best by following the instructions listed on the package., Whether you are using liquid or powdered glaze, it will have to be vigorously stirred before use.
If you are using a liquid glaze, a whisk will probably suffice as a stirring tool.If using a powdered glaze, try using a stirring rod attached to a power drill to get the smoothest texture., Apply the mixed glaze to a test piece of pottery.
This test piece might be an item you have set aside specifically for this purpose, or it might be a leftover shard from a larger item.
Choose a test piece that closely resembles the item you are finishing.
This will provide the most reliable test.
After applying glaze to the test piece, allow it to dry.
The glaze will look slightly different dry than wet., Slowly pour glaze into your pot, and swirl the item around to ensure complete coverage., You will probably have poured more into your pot than you need to coat the inside, so you can remove the rest., If there are any spots that the glaze did not reach in the pouring process, fill them in using a brush.
You can remove excess glaze using a damp sponge or a paint scraper., If your item is small enough, pick it up with a pair of tongs and dip it straight into the bucket or vat of glaze until it is completely covered, remove it, and then clear excess glaze with a damp sponge, a brush, or a paint scraper.You can buy specialized glazing tongs at a pottery supply store.
If your tongs leave marks on the pot, touch them up by brushing them with glaze once you remove your item., If your item is too large to dip into the glaze but small enough to hold over the bucket or vat, you can pour it over the outside of your pot.
This will probably result in a thin layer outer layer of glaze., If your item is too large to move during the glazing process, apply the glaze with the tools at hand.
Use large brushes to cover the main parts of your pottery, and small brushes or a sponge to fill in the smaller areas.
Don’t dip your tools straight into the buckets or vats of glaze.
Put some of your glaze into a a cup or bowl, and dip your brush or sponge into the smaller vessel., Once you have a layer of glaze on your pottery, set it aside to let it dry.
You might want to apply a second layer of glaze to use multiple colors or create designs, but if you do so immediately after the first layer the colors might run together., You can add as many layers of glaze as you want, and mix up your colors as well as your brushing and sponging techniques to create unique designs., If you did not wax your pot, be sure to wipe any glaze off of the bottom with a sponge.
If you did wax your pot, remove any glaze that has gotten onto the dried wax., No matter how many layers of glaze you’ve added, you have to wait for the final layer to dry thoroughly before firing your pottery., Though you already fired it in the creation stage before you began the glazing process, you should fire it again once you are done.
About the Author
Ruth Mitchell
Specializes in breaking down complex practical skills topics into simple steps.
Rate This Guide
How helpful was this guide? Click to rate: