How to Make a Play Telephone

Step-by-Step Guide

1. 1

   Step 1: Get a piece of string and two empty cans (preferably soup cans).

   If you don't have cans or you don't want to work with them, you can also use cups (preferably plastic),such as the ones shown here.
   
   Plastic is a little easier to work with than metal.
   
   Styrofoam cups do not work well because they are soft and spongy and absorb sound instead of transmitting it.
   
   In a pinch, you can use disposable paper cups, but plastic and metal take more wear-and-tear.
2. 2

   Step 2: Punch a hole at the bottom of each can just small enough for string to fit through.

   You might need your parents or teacher to help with this.
   
   You can make the hole with a drill, hammer and a nail, or some other sharp, pointed tool.
   
   If you are using plastic cups, you can probably just poke a hole with a push pin or any other sharp point.
   
   Make the holes only large enough to put the string through and no larger. , It might help to push the string through with the end of a paper clip or thread it through with a bit of wire. , When you’re done, pull the string tight so the knot rests in the bottom of the can.
   
   You can tie the string around a little piece of a toothpick if you can't get it to stay with just a knot. , Tie a knot, as before, and pull the string tight. ,, Make the string as tight as you can.
   
   If you've made it correctly, you should hear your friend speak, even if it is a long piece of string.
   
   Then, talk while your friend listens.
3. 3

   Step 3: Pass the string through the hole and into the bottom of one can or cup.

4. 4

   Step 4: Tie a knot in the end of the string that is inside the cup.

5. 5

   Step 5: Place the untied end of the string through the bottom of the other can or cup.

6. 6

   Step 6: Get a partner.

7. 7

   Step 7: Place the open end of one can over your ear and have your partner speak into the open end of the other can.

Detailed Guide

About the Author