How to Make an Infinity Mirror

Step-by-Step Guide

1. 1

   Step 1: Find a suitable wooden frame.

   Preferably get something with a deep frame or at least 1/2 half inch depth.
2. 2

   Step 2: Disassemble the frame and remove the glass.

   ,,,,, Starting from one corner, spray some liquid soap as you slowly lay this over the glass.
   
   Smooth out any bubbles and leave to dry. ,, As an option, get a mirror in its frame and make another frame to go over the original to give more depth with the wooden splines. about
   2.5 inch (6.4 cm) to 3 inch (7.6 cm) is ideal for this. ,,,,, Drill holes big enough for the lights to push into on the frame you just made. about halfway in the width of the wood and evenly around the entire frame. ,, Glue this frame to the mirrors frame. ,
3. 3

   Step 3: Prepare the glass by making it perfectly clean.

4. 4

   Step 4: Spray the glass with a little water and a drop of wash liquid.

5. 5

   Step 5: Take the roll of window film and cut a piece a couple of inches bigger than the mirror.

6. 6

   Step 6: Remove the backing from the window film

7. 7

   Step 7: Lay it over the glass pane.

8. 8

   Step 8: Once dry leave to one side for later.

9. 9

   Step 9: Obtain a mirror with the same size as the framed glass that was tinted.

10. 10

    Step 10: Assemble the framed glass you tinted

11. 11

    Step 11: make sure the tinted area is facing the inside of the frame.

12. 12

    Step 12: Secure the tinted glass with glue.

13. 13

    Step 13: Add a inner frame to hold the mirror when it is placed on the frame.

14. 14

    Step 14: Using a cutter

15. 15

    Step 15: create a groove for the LED wirings and adapter.

16. 16

    Step 16: Install the LED lights around the inner frame.

17. 17

    Step 17: After adhering the LED lights

18. 18

    Step 18: let the wiring out of the groove.

19. 19

    Step 19: Place the mirror on top of the frame.

20. 20

    Step 20: Plug it and switch on your lights and enjoy.

Detailed Guide

About the Author