How to Make Electronics Using Cadsoft Eagle

Step-by-Step Guide

1. 1

   Step 1: Find a schematic diagram of the circuit board you want to make.

   You can easily find schematics by searching google for "<type-of-circuit> + schematics".
   
   For example: "stereo amplifier schematics"
2. 2

   Step 2: Draw this schematic diagram into Cadsoft Eagle.

   This is done by creating a new schematic and adding components using the Add tool and then adding connections between components by using the "Net" tool. , This will ensure that you have not made any errors while designing. ,,,,,, Click "Process job". , The price for it can be as low as $1 per board.
   
   Try contacting these manufacturers:
   Seeed Studio, iTead Studio and PCB Pool. ,,,
3. 3

   Step 3: Check the schematics for errors by using the "Electrical Rules Check" (ERC) in the Tools menu.

4. 4

   Step 4: Create a board from your schematic by clicking on the Board icon.

5. 5

   Step 5: Place components inside the board outline in the Board view.

6. 6

   Step 6: Route your board automatically by Choosing Auto under the Tools menu and clicking Ok.

7. 7

   Step 7: Check your board for errors by using the "Design Rule Check" (DRC) tool.

8. 8

   Step 8: Create the Gerber files by using the "Cam Processor" tool.

9. 9

   Step 9: Click "Open job" and select the file "gerb274x.cam" (it is provided by default with Eagle).

10. 10

    Step 10: Send the Gerber files that was created to your favorite prototype manufacturer and get prototypes made for it.

11. 11

    Step 11: Order the components you need from an online shop such as Digi-key

12. 12

    Step 12: SparkFun or Tayda Electronics.

13. 13

    Step 13: Wait until your circuit board and your components arrive in the mail

14. 14

    Step 14: Solder the components to the circuit

Detailed Guide

About the Author