How to Make Mozzarella Cheese
Bring a large pot of water to a simmer on the stove., Add the rennet to the water., Add the citric acid powder to the water., Pour the milk into a pot., Pour the water in with the dissolved citric acid into the milk., Heat the mixture until it...
Step-by-Step Guide
-
Step 1: Bring a large pot of water to a simmer on the stove.
It will register 180ºF (82ºC) on a thermometer. -
Step 2: Add the rennet to the water.
Add ½ tablet or ½ tsp. (2.5 ml) of liquid rennet to ¼ cup (60 ml) of cool distilled water.
Stir the tablet until it's dissolved and set it aside. , Add 2 tsp. (10 ml) of citric acid powder to 1/2 cup (120 ml) of cool distilled water.
Stir until it is dissolved. , Place 1 gallon (3.8Â L) of pasteurized milk into a 6-8 qt. (5.7-7.6L) pot.
Do not use ultra pasteurized (UHT) milk.
UHT milk does not form a solid enough curd to make mozzarella cheese. , Stir gently, and there will be some curdling. , Use medium-low heat.
Stir occasionally to keep the milk from scorching.
You can use a whisk, spoon, or heatproof spatula.
The curd will begin to develop at this stage.
Use a thermometer to determine when the milk reaches 88ºF (31ºC). , Stir carefully for 30 seconds and then lower the heat to low.
Cook the milk mixture over low heat until it reaches 105ºF (40ºC). , This will allow the curd, which is the white mass, to separate from the whey or liquid before cutting the curd. , Cut the curd into one inch (2.5 cm) squares with a knife then let it rest for about 5 minutes.
It may help to hold the curd still with a ladle or large spoon while you are cutting.
Hold a knife straight upright and cut the curd into slices in the pot.
Then repeat the same cuts with the knife at an angle.
Turn the pot, cut, and cut again to make a checkerboard of cuts.
You may not be able to see your previous cuts.
Just do the best you can to make it even. , Use a stainless steel slotted spoon to transfer the curd from the pot and place it in the colander or cheesecloth, collecting any whey that drains off in the bowl beneath.
If you are using cheesecloth, you can tie the ends and hang the mozzarella to drain for three to four hours if you would like a firmer cheese.
If you choose this option, do not return it to the pot after draining before adding the salt and starting to work the curd.
When you're done, transfer the whey that has drained off back to the pot. , To prepare the curd, you should first place the colander of curd into the pot of whey to maintain its temperature.
Then, add ½ tsp. (2.5 ml) of salt to the curd.
Once you've done that, you can fold the curd over on itself to increase the draining of whey.
The more you fold the curd at this point, the more dry your mozzarella will be. , The water should be 170
- 175ºF (76
- 79ºC). , Place one-third of the curd in the hot water at a time and let sit for approximately three minutes.
Drain the water and then sprinkle two tablespoons of salt on it.
Place two to three cups onto the curds and let sit for two minutes.
Then, take a wooden spoon and begin to push all the curds to one side of the bowl.
If the cheese curds are ready for stretching, they will stick together.
If the curds aren't sticking together, then you may have to add more hot water and let sit a little longer.
When it sticks together well, it's time to stretch! , When you do this, you should stretch it when it gets sticky enough that it begins to hold together.
If it does not stretch, check the temperature of your water.
It may be too cool.
If the mozzarella cheese begins to tear, place it back in the water for a moment to heat up again.
Stretch the mozzarella cheese in two inch strips and fold it over on itself several times.It is important not to overwork the cheese, for it will make a dry and hard mozzarella ball. , Form the mozzarella cheese into a ball when it forms a mass and has a sheen.
To accomplish this, fold a two inch strip over 3 times and then force it through your thumb and index finger.
Once you have a ball, squeeze your thumb and index finger together to break loose the bottom of the mozzarella ball from the rest of the cheese strip. , Mix 2 cups (465 ml) of whey with 2 tbsp. (10 ml) of salt and some ice.
This is the brine for your mozzarella cheese.
You can cool the mozzarella cheese in the brine.
When it has sufficiently cooled, you can remove it from the brine. , Wrap it in plastic wrap or store it in an airtight container.
Refrigerate it for up to a week or freeze it for up to a month. -
Step 3: Add the citric acid powder to the water.
-
Step 4: Pour the milk into a pot.
-
Step 5: Pour the water in with the dissolved citric acid into the milk.
-
Step 6: Heat the mixture until it reaches 88ºF (31ºC).
-
Step 7: Add the water with the dissolved rennet to the milk mixture.
-
Step 8: Take the pot off the stove and let it stand undisturbed for 15 minutes.
-
Step 9: Cut the curd.
-
Step 10: Place a colander or a piece of cheesecloth over a bowl.
-
Step 11: Prepare the curd.
-
Step 12: Pour some water from the simmering pot into a large bowl.
-
Step 13: Transfer the curd to the hot water.
-
Step 14: Remove the curd from the water.
-
Step 15: Shape the mozzarella cheese.
-
Step 16: Make the brine.
-
Step 17: Store the cheese.
Detailed Guide
It will register 180ºF (82ºC) on a thermometer.
Add ½ tablet or ½ tsp. (2.5 ml) of liquid rennet to ¼ cup (60 ml) of cool distilled water.
Stir the tablet until it's dissolved and set it aside. , Add 2 tsp. (10 ml) of citric acid powder to 1/2 cup (120 ml) of cool distilled water.
Stir until it is dissolved. , Place 1 gallon (3.8Â L) of pasteurized milk into a 6-8 qt. (5.7-7.6L) pot.
Do not use ultra pasteurized (UHT) milk.
UHT milk does not form a solid enough curd to make mozzarella cheese. , Stir gently, and there will be some curdling. , Use medium-low heat.
Stir occasionally to keep the milk from scorching.
You can use a whisk, spoon, or heatproof spatula.
The curd will begin to develop at this stage.
Use a thermometer to determine when the milk reaches 88ºF (31ºC). , Stir carefully for 30 seconds and then lower the heat to low.
Cook the milk mixture over low heat until it reaches 105ºF (40ºC). , This will allow the curd, which is the white mass, to separate from the whey or liquid before cutting the curd. , Cut the curd into one inch (2.5 cm) squares with a knife then let it rest for about 5 minutes.
It may help to hold the curd still with a ladle or large spoon while you are cutting.
Hold a knife straight upright and cut the curd into slices in the pot.
Then repeat the same cuts with the knife at an angle.
Turn the pot, cut, and cut again to make a checkerboard of cuts.
You may not be able to see your previous cuts.
Just do the best you can to make it even. , Use a stainless steel slotted spoon to transfer the curd from the pot and place it in the colander or cheesecloth, collecting any whey that drains off in the bowl beneath.
If you are using cheesecloth, you can tie the ends and hang the mozzarella to drain for three to four hours if you would like a firmer cheese.
If you choose this option, do not return it to the pot after draining before adding the salt and starting to work the curd.
When you're done, transfer the whey that has drained off back to the pot. , To prepare the curd, you should first place the colander of curd into the pot of whey to maintain its temperature.
Then, add ½ tsp. (2.5 ml) of salt to the curd.
Once you've done that, you can fold the curd over on itself to increase the draining of whey.
The more you fold the curd at this point, the more dry your mozzarella will be. , The water should be 170
- 175ºF (76
- 79ºC). , Place one-third of the curd in the hot water at a time and let sit for approximately three minutes.
Drain the water and then sprinkle two tablespoons of salt on it.
Place two to three cups onto the curds and let sit for two minutes.
Then, take a wooden spoon and begin to push all the curds to one side of the bowl.
If the cheese curds are ready for stretching, they will stick together.
If the curds aren't sticking together, then you may have to add more hot water and let sit a little longer.
When it sticks together well, it's time to stretch! , When you do this, you should stretch it when it gets sticky enough that it begins to hold together.
If it does not stretch, check the temperature of your water.
It may be too cool.
If the mozzarella cheese begins to tear, place it back in the water for a moment to heat up again.
Stretch the mozzarella cheese in two inch strips and fold it over on itself several times.It is important not to overwork the cheese, for it will make a dry and hard mozzarella ball. , Form the mozzarella cheese into a ball when it forms a mass and has a sheen.
To accomplish this, fold a two inch strip over 3 times and then force it through your thumb and index finger.
Once you have a ball, squeeze your thumb and index finger together to break loose the bottom of the mozzarella ball from the rest of the cheese strip. , Mix 2 cups (465 ml) of whey with 2 tbsp. (10 ml) of salt and some ice.
This is the brine for your mozzarella cheese.
You can cool the mozzarella cheese in the brine.
When it has sufficiently cooled, you can remove it from the brine. , Wrap it in plastic wrap or store it in an airtight container.
Refrigerate it for up to a week or freeze it for up to a month.
About the Author
Amber Sullivan
Amber Sullivan has dedicated 2 years to mastering lifestyle and practical guides. As a content creator, Amber focuses on providing actionable tips and step-by-step guides.
Rate This Guide
How helpful was this guide? Click to rate: