How to Muck Out a Stall

Step-by-Step Guide

1. 1

   Step 1: Remove the hay

   Removing the horse is also a good idea.
2. 2

   Step 2: water bucket and manger to avoid contamination and keep the stall clean.

   Sift the shavings through the pitchfork so all that remains is manure(droppings).
   
   Then, deposit the manure in the wheelbarrow. ,,,, Bank up the shavings against the walls. , To open the bale, cut the tape with scissors or a special safety barn knife that has a recessed blade. ,,, If you couldn’t remove the water bowl because it was fixed to the wall, change the water. , This is especially important if you are boarding your horse.
3. 3

   Step 3: Remove all the bigger

4. 4

   Step 4: more obvious droppings on the surface with the shavings fork or rubber glove.

5. 5

   Step 5: When you have done this

6. 6

   Step 6: toss the shavings to the sides of the stall

7. 7

   Step 7: removing any droppings that fall out of them as you do so.

8. 8

   Step 8: Scoop up the wet shavings with the shavings fork.

9. 9

   Step 9: Sweep the floor and shovel up any remaining manure.

10. 10

    Step 10: If possible

11. 11

    Step 11: leave the floor to dry and air for a while before pulling back the shavings to lay the bed.

12. 12

    Step 12: If necessary

13. 13

    Step 13: add new shavings.

14. 14

    Step 14: Use the four-pronged pitchfork to loosen them and dump them into the stall.

15. 15

    Step 15: Spread the shavings around to make a comfortable stall.

16. 16

    Step 16: Replace the water and feed bowls.

17. 17

    Step 17: Sweep the yard if necessary and put the tools back neatly.

Detailed Guide

About the Author