How to Remove Sticky Residue from Non Slip Items in Bathtub

Step-by-Step Guide

1. 1

   Step 1: Use WD-40.

   It contains petroleum distillates that will dissolve the adhesive left behind by tape, bumper stickers, and other self-adhesive appliqués.
   
   It says right on the can that it will remove grease, tar, and adhesives.
2. 2

   Step 2: Test spray a small area in a spot that won't be easily noticed and see if the WD-40 will harm the surface.

   You will probably be ok using it on porcelain cast-iron tubs, but may not be ok for plastic or fiberglass tubs.
   
   Always test first. , You can use a plastic scraper (or an old credit card) to help scrape the adhesive off without scratching the surface.
   
   Wipe up with paper towels or similar absorbent cloth. , WD-40 has warnings on the can about proper ventilation, flammability, and the danger of breathing the vapors.
   
   Read the warnings and follow their advice. , Do not attempt to use the bathtub until the WD-40 has been washed away. (Try using Soft Scrub).
   
   The bathtub will be very slippery until the WD-40 gets washed away and you could easily slip and fall, injuring yourself if you don't clean the WD-40 thoroughly from the tub surface.
3. 3

   Step 3: Once you have tested the surface and everything seems ok

4. 4

   Step 4: spray a small area where the adhesive needs to be removed and let it soak a while.

5. 5

   Step 5: Do small sections at a time.

6. 6

   Step 6: Remember that WD-40's primary purpose is to be a lubricant.

Detailed Guide

About the Author