How to Set up a Trampoline
Check the packages., Organize the parts., Gather your tools., Put together the circular pieces., Assemble the legs of the trampoline., Secure the screws and bolts., Flip over the frame., Begin setting up the springs with a partner., Attach the...
Step-by-Step Guide
-
Step 1: Check the packages.
All of the materials for a trampoline will usually come in two or three packages.
Empty each of the packages and make sure that you have everything that is listed in the instructions.
A missing piece can prevent you from setting up the trampoline properly, so you don’t want to begin putting it together without double checking that you have everything you need.If there is a missing piece, call the company you bought the trampoline from and see what can be done about it.
Sometimes they will ship you the missing piece, or they will exchange your trampoline for an entirely new one. -
Step 2: Organize the parts.
There are a lot of parts, big and small, that come with the trampoline package.
The setting up process can be confusing if all of the parts are in one pile.
Take some time to spread out the pieces and put them in groups according to what they are being used for.Some of the pieces may look similar, but will be used for different areas. , You don’t need too many tools to set up a trampoline, but it is helpful to have them readily available.
You will need a power drill or Phillips head screwdriver.
Many packages will come with a screwdriver.
You will also need a rubber mallet and spring puller, which comes with the packaging.
You should also have gloves handy for when it is time to attach the springs.It’s easy to get your hands caught in the springs, so gloves prevent your skin from getting caught up in them. , Lay out the pieces that make up the circular frame to get an idea of how big the trampoline will be.
Then, begin attaching by snapping the parts together until you have a ring shape.
Once assembled, the ring should be laying flat on the ground for now., Once the ring is together, begin assembling the legs.
There should be spots on the ring designated for the legs.
The legs should fit into the spots easily, but if not, you can use a hammer to fit them into place.
You should, however, hammer lightly and use a barrier (like a towel) to soften the blow of the hammer., Now that the frame is put together, you can secure the nuts and bolts into their proper places.
Make sure that all of the parts are secure and in the correct positions first, though.
After you’re finished securing the screws and bolts, look over them to make sure that they are secure.Using a power drill instead a Phillips head screwdriver will make the securing process go by faster.
Using a screwdriver alone can take a long time. , Even if you’re quite strong, you will probably still need a partner for this step.
Find a partner and go to opposite sides of the frame.
Carefully flip the frame of the trampoline over until it is on its legs.
It shouldn’t be wobbling when you turn it over.If you find that it is wobbling, inspect the set up to see which parts aren’t secure.
The wobbling will probably be because of the legs.
Use a screwdriver or power drill to secure the unstable parts. , Having a partner install the springs with you makes properly aligning the mat easier.
You and your partner should grab an even amount of springs—four each to start out with is okay.
Go to opposite sides of the trampoline.
Make sure you are exactly opposite of each other by counting the hooks., Begin attaching the springs to their designated hooks.
Then, attach the hooks to the metal rings.
You will need the spring pulling device to stretch the attach the springs to the hooks, and a rubber mallet to pound the springs into place once attached to the metal rings.The springs will start to get harder to attach about halfway through because of the tightening of the mat. , The protective pad helps to cushion a fall on the springs.
Simply lay the pad over the springs.
There should be holes at the bottom the padding that line up with the legs.
Protective pads usually have metal hooks, Velcro, or ropes to secure the pad to the trampoline.
Once you are finished attaching it, make sure that it is aligned over all of the springs., Not every trampoline will come with an enclosure, but you can choose to purchase one with your trampoline.
First, grab your enclosure net and bungee loops.
The bungee loops should look rubber band-like.
Attach the bungee loops to the net.The loops help keep the net in place when it is being bounced against.
Some regulations make it so that enclosures are required for trampolines. , The posts for the net may come in multiple pieces.
If so, connect them and then cover them with foam sleeves.
Once the posts are connected, use a screwdriver or drill to secure them with screws or bolts, depending on what the package came with., Each of the bungee loops should have hooks attached to them.
Attach each of the hooks to the holes on top of the posts.
Then, lift the posts one by one and place them in the O-rings of the enclosure net.
Once the posts are placed in the O-rings, the enclosure net just needs to be lifted to be put in place., Check everything over once more to make sure the trampoline is secure.
Then, get on the trampoline and bounce a few times to make sure it is stable.
If it is, your trampoline is finished and ready for activity.If the trampoline is slightly unstable, check it over for parts that may not be secured correctly.
Use a screwdriver or power drill to secure those parts.
Call the company you bought the trampoline from if you can’t fix the problem.
Do not jump on it until the problem is fixed. -
Step 3: Gather your tools.
-
Step 4: Put together the circular pieces.
-
Step 5: Assemble the legs of the trampoline.
-
Step 6: Secure the screws and bolts.
-
Step 7: Flip over the frame.
-
Step 8: Begin setting up the springs with a partner.
-
Step 9: Attach the springs evenly with your partner.
-
Step 10: Put on the protective pad.
-
Step 11: Attach the bungee loops.
-
Step 12: Connect and secure the posts.
-
Step 13: Attach the hooks.
-
Step 14: Test your finished trampoline.
Detailed Guide
All of the materials for a trampoline will usually come in two or three packages.
Empty each of the packages and make sure that you have everything that is listed in the instructions.
A missing piece can prevent you from setting up the trampoline properly, so you don’t want to begin putting it together without double checking that you have everything you need.If there is a missing piece, call the company you bought the trampoline from and see what can be done about it.
Sometimes they will ship you the missing piece, or they will exchange your trampoline for an entirely new one.
There are a lot of parts, big and small, that come with the trampoline package.
The setting up process can be confusing if all of the parts are in one pile.
Take some time to spread out the pieces and put them in groups according to what they are being used for.Some of the pieces may look similar, but will be used for different areas. , You don’t need too many tools to set up a trampoline, but it is helpful to have them readily available.
You will need a power drill or Phillips head screwdriver.
Many packages will come with a screwdriver.
You will also need a rubber mallet and spring puller, which comes with the packaging.
You should also have gloves handy for when it is time to attach the springs.It’s easy to get your hands caught in the springs, so gloves prevent your skin from getting caught up in them. , Lay out the pieces that make up the circular frame to get an idea of how big the trampoline will be.
Then, begin attaching by snapping the parts together until you have a ring shape.
Once assembled, the ring should be laying flat on the ground for now., Once the ring is together, begin assembling the legs.
There should be spots on the ring designated for the legs.
The legs should fit into the spots easily, but if not, you can use a hammer to fit them into place.
You should, however, hammer lightly and use a barrier (like a towel) to soften the blow of the hammer., Now that the frame is put together, you can secure the nuts and bolts into their proper places.
Make sure that all of the parts are secure and in the correct positions first, though.
After you’re finished securing the screws and bolts, look over them to make sure that they are secure.Using a power drill instead a Phillips head screwdriver will make the securing process go by faster.
Using a screwdriver alone can take a long time. , Even if you’re quite strong, you will probably still need a partner for this step.
Find a partner and go to opposite sides of the frame.
Carefully flip the frame of the trampoline over until it is on its legs.
It shouldn’t be wobbling when you turn it over.If you find that it is wobbling, inspect the set up to see which parts aren’t secure.
The wobbling will probably be because of the legs.
Use a screwdriver or power drill to secure the unstable parts. , Having a partner install the springs with you makes properly aligning the mat easier.
You and your partner should grab an even amount of springs—four each to start out with is okay.
Go to opposite sides of the trampoline.
Make sure you are exactly opposite of each other by counting the hooks., Begin attaching the springs to their designated hooks.
Then, attach the hooks to the metal rings.
You will need the spring pulling device to stretch the attach the springs to the hooks, and a rubber mallet to pound the springs into place once attached to the metal rings.The springs will start to get harder to attach about halfway through because of the tightening of the mat. , The protective pad helps to cushion a fall on the springs.
Simply lay the pad over the springs.
There should be holes at the bottom the padding that line up with the legs.
Protective pads usually have metal hooks, Velcro, or ropes to secure the pad to the trampoline.
Once you are finished attaching it, make sure that it is aligned over all of the springs., Not every trampoline will come with an enclosure, but you can choose to purchase one with your trampoline.
First, grab your enclosure net and bungee loops.
The bungee loops should look rubber band-like.
Attach the bungee loops to the net.The loops help keep the net in place when it is being bounced against.
Some regulations make it so that enclosures are required for trampolines. , The posts for the net may come in multiple pieces.
If so, connect them and then cover them with foam sleeves.
Once the posts are connected, use a screwdriver or drill to secure them with screws or bolts, depending on what the package came with., Each of the bungee loops should have hooks attached to them.
Attach each of the hooks to the holes on top of the posts.
Then, lift the posts one by one and place them in the O-rings of the enclosure net.
Once the posts are placed in the O-rings, the enclosure net just needs to be lifted to be put in place., Check everything over once more to make sure the trampoline is secure.
Then, get on the trampoline and bounce a few times to make sure it is stable.
If it is, your trampoline is finished and ready for activity.If the trampoline is slightly unstable, check it over for parts that may not be secured correctly.
Use a screwdriver or power drill to secure those parts.
Call the company you bought the trampoline from if you can’t fix the problem.
Do not jump on it until the problem is fixed.
About the Author
Ann Johnson
Enthusiastic about teaching practical skills techniques through clear, step-by-step guides.
Rate This Guide
How helpful was this guide? Click to rate: