How to Torch Weld
Put on protective clothing, including long pants and shirt, welder's gloves and eye protection., Work in an open space free of any flammable materials. , Turn on the fuel adjustment knob., Light the torch., Adjust the flame size.
Step-by-Step Guide
-
Step 1: Put on protective clothing
The knob is located on the shorter of the 2 tanks on the torch.
Turn the knob slowly, about 1/2 inch (1.3 cm), to release the gas. , Tilt the lighter so that the fuel is trapped in the spark cup and slowly light the torch. , Carefully open the oxygen valve a little bit at a time until you have the size flame you require.
A steady flame will have well defined blue edges. -
Step 2: including long pants and shirt
-
Step 3: welder's gloves and eye protection.
-
Step 4: Work in an open space free of any flammable materials.
-
Step 5: Turn on the fuel adjustment knob.
-
Step 6: Light the torch.
-
Step 7: Adjust the flame size.
Detailed Guide
The knob is located on the shorter of the 2 tanks on the torch.
Turn the knob slowly, about 1/2 inch (1.3 cm), to release the gas. , Tilt the lighter so that the fuel is trapped in the spark cup and slowly light the torch. , Carefully open the oxygen valve a little bit at a time until you have the size flame you require.
A steady flame will have well defined blue edges.
About the Author
Joshua Cole
Specializes in breaking down complex practical skills topics into simple steps.
Rate This Guide
How helpful was this guide? Click to rate: