How to Use a Cartomizer
Go to a smoke shop., Choose your cartomizer., Buy the E-Liquid., Unwrap your Cartomizer., Remove the circular plug., Remove the cap to your E-Liquid., Allow the cartomizer to set for a minute or two., Insert the plug., Attach the pieces., Use the...
Step-by-Step Guide
-
Step 1: Go to a smoke shop.
Talk to the salesperson to get a sense of which product would work best for you.
Keep in mind that buying a starter kit with all of the relevant products, including a charger, might be a good way to start
-- these start at around $20 and go up from there.
If you just want to buy the parts, it could be much cheaper
-- cartomizers can run less than $5, and then you purchase the juice in a variety of flavors starting at less than $5., A cartomizer is only one of a few different choices if you’re interested in using an e-cigarette.
Cartomizers were developed to simplify the e-cigarette product, so they don’t have many pieces.
They take more liquid than other products, and usually have a longer battery life.
Keep in mind that they can often be fragile and typically last 1-2 weeks. , Talk to the salesperson and see what they have in stock, and what they would recommend for a beginning user.
Keep in mind that the liquid comes in an array of flavors and amounts of nicotine.
You will probably need to try a few different ones to figure out which one you like the best., Familiarize yourself with its design.
Remove the rubber ends. , These are typically white or clear.
In the center of each plug is a tiny hole, which you need to pop out.
Once done, you will be able to see polyfill material when you look down into your cartomizer now. , Proceed to add 20-25 drops of E-Liquid down into the Cartomizer.
Keep count as you do this to avoid overfilling. , This will allow the liquid inside to saturate the filling and prime it for vaping.
It will help you to avoid burning out your tip.
The tip must be wet enough, so let it saturate for the full amount of time. , You could choose to put the one with the hole you removed back in.
Another option would be a “drip tip,” which would take the place of plugs. , Rotate the cartomizer onto the threading of your electronic smoking device or vaporizer.
Tighten the pieces together. , Put the cartomizer between your lips.
Hold down the button or switch for a moment.
Proceed to vape as desired.You don't have to inhale as forcefully with a cartomizer as you would with a traditional cigarette., When your juice runs low, you will need to refill.
Keep in mind that when your tips need more E-Liquid after the initial fill, each cartomizer can be refilled with an estimated 10-15 drops as needed. , Most will only last 1-2 weeks, so purchasing a cartomizer will be a constant expense.
With your new cartomizer, follow the instructions for filling, and enjoy! -
Step 2: Choose your cartomizer.
-
Step 3: Buy the E-Liquid.
-
Step 4: Unwrap your Cartomizer.
-
Step 5: Remove the circular plug.
-
Step 6: Remove the cap to your E-Liquid.
-
Step 7: Allow the cartomizer to set for a minute or two.
-
Step 8: Insert the plug.
-
Step 9: Attach the pieces.
-
Step 10: Use the cartomizer.
-
Step 11: Refill your cartomizer.
-
Step 12: Replace the cartomizer.
Detailed Guide
Talk to the salesperson to get a sense of which product would work best for you.
Keep in mind that buying a starter kit with all of the relevant products, including a charger, might be a good way to start
-- these start at around $20 and go up from there.
If you just want to buy the parts, it could be much cheaper
-- cartomizers can run less than $5, and then you purchase the juice in a variety of flavors starting at less than $5., A cartomizer is only one of a few different choices if you’re interested in using an e-cigarette.
Cartomizers were developed to simplify the e-cigarette product, so they don’t have many pieces.
They take more liquid than other products, and usually have a longer battery life.
Keep in mind that they can often be fragile and typically last 1-2 weeks. , Talk to the salesperson and see what they have in stock, and what they would recommend for a beginning user.
Keep in mind that the liquid comes in an array of flavors and amounts of nicotine.
You will probably need to try a few different ones to figure out which one you like the best., Familiarize yourself with its design.
Remove the rubber ends. , These are typically white or clear.
In the center of each plug is a tiny hole, which you need to pop out.
Once done, you will be able to see polyfill material when you look down into your cartomizer now. , Proceed to add 20-25 drops of E-Liquid down into the Cartomizer.
Keep count as you do this to avoid overfilling. , This will allow the liquid inside to saturate the filling and prime it for vaping.
It will help you to avoid burning out your tip.
The tip must be wet enough, so let it saturate for the full amount of time. , You could choose to put the one with the hole you removed back in.
Another option would be a “drip tip,” which would take the place of plugs. , Rotate the cartomizer onto the threading of your electronic smoking device or vaporizer.
Tighten the pieces together. , Put the cartomizer between your lips.
Hold down the button or switch for a moment.
Proceed to vape as desired.You don't have to inhale as forcefully with a cartomizer as you would with a traditional cigarette., When your juice runs low, you will need to refill.
Keep in mind that when your tips need more E-Liquid after the initial fill, each cartomizer can be refilled with an estimated 10-15 drops as needed. , Most will only last 1-2 weeks, so purchasing a cartomizer will be a constant expense.
With your new cartomizer, follow the instructions for filling, and enjoy!
About the Author
Linda Hernandez
Linda Hernandez has dedicated 3 years to mastering lifestyle and practical guides. As a content creator, Linda focuses on providing actionable tips and step-by-step guides.
Rate This Guide
How helpful was this guide? Click to rate: