How to Use a Nutmeg Grinder
Learn about the different parts of the nutmeg grinder., Open the container., Restore the lid and base to form one container again., Use the crank to turn the grinder.
Step-by-Step Guide
-
Step 1: Learn about the different parts of the nutmeg grinder.
There is a cutting blade at the base of the container, at the bottom of a spring-loaded plate.
The crank handle that you can see on the top is turned to cause the blade to grind the whole nutmeg.
The nutmegs on the top are there for both decoration and use (if used before they go stale). -
Step 2: Open the container.
Simply twist the middle of the grinder to release the top from the bottom.
In the middle you will see a round hole and a shaft that leads down to the blade.
Place a whole nutmeg into the shaft. , Check it is all firmly in place. , Turn as much as needed to obtain the freshly ground nutmeg.
Be sure to grind into a bowl. -
Step 3: Restore the lid and base to form one container again.
-
Step 4: Use the crank to turn the grinder.
Detailed Guide
There is a cutting blade at the base of the container, at the bottom of a spring-loaded plate.
The crank handle that you can see on the top is turned to cause the blade to grind the whole nutmeg.
The nutmegs on the top are there for both decoration and use (if used before they go stale).
Simply twist the middle of the grinder to release the top from the bottom.
In the middle you will see a round hole and a shaft that leads down to the blade.
Place a whole nutmeg into the shaft. , Check it is all firmly in place. , Turn as much as needed to obtain the freshly ground nutmeg.
Be sure to grind into a bowl.
About the Author
Donald Jackson
Experienced content creator specializing in creative arts guides and tutorials.
Rate This Guide
How helpful was this guide? Click to rate: