How to Breed Blue Gouramis
Set up a large tank., Add hiding places., Have three total tanks., Make the water shallower., Add floating plants., Up the temperature., Feed the breeding pair extra., Introduce a male and female., Look for the bubble nest., Wait for the female to...
Step-by-Step Guide
-
Step 1: Set up a large tank.
When breeding, gouramis need an extra large tank.
The female needs to be able to get away from the male, as the male may make a few too many advances during breeding time.The tank needs to be 30 gallons or so for breeding. -
Step 2: Add hiding places.
In addition, the female needs place where she can hide.
The reason for this step is the same as the reason for having a large tank.
The male may be too intrusive and threatening while breeding.You can use items like driftwood and decorations to create hiding places.
You can also use rocks for this purpose.
Make sure you buy items that are meant for the aquarium., Once your female has had her babies, she will need to be removed.Similarly, once the babies hatch, you'll need to take the male out.
That means you need a tank each for the male, female, and the babies.The other two tanks that are not for breeding can be 20 gallons each.
You can house other fish in these aquariums.
Fish that are approximately the same size work best.To scoop up a fish, you can remove some of the plant life and lower the water in the tank to make it easier to catch the fish.To acclimate the fish to the new tank, you can treat it like bringing a new fish home.
That is, place it in a smaller container or plastic bag with some of the old tank water.
Add a cup of the new water and let it sit for 10 minutes before adding just the fish to the new tank., Gouramis respond to a change in the depth of the water.
When it becomes less deep, they are more likely to breed than when it is deeper.
Remove some of the water from the tank to make the depth shallower to encourage breeding.The tank can be as low as 6 inches for breeding., Male gouramis build a bubble nest for their young.
To do so, they need plant leaves at the surface.
Therefore, you need to add plants to the aquarium to allow them to breed.Ricca is a common floating plant used with gouramis.
However, you can also use fake floating plants designed for aquariums., For breeding, the gouramis prefer the water to be a bit warmer than usual.
You'll need to increase the temperature to 80 degrees Fahrenheit.You can actually keep the tank at this temperature normally, but you can also keep it as low as 72 degrees Fahrenheit., Before you introduce the pair, you should be offering them live food or frozen food.
You can offer this food a couple of times a day in small portions.The extra protein in this diet will help prepare the pair for breeding.Blood worms are a good option for blue gouramis., Place a male gourami and a female gourami in the breeding tank you've prepared.
You don't need to do anything special to introduce the pair except placing them in the same tank.You should only have one breeding pair in the tank at a time. , The male will build a bubble nest.
It may be in a corneror under a floating plant leaf.Usually, the nest will be at the surface.
The male creates bubbles with his saliva that form a nest.
He will often join it with the side of the tank or a leaf to help it hold together., Watch the nest to see when the female lays her eggs in it.
Once she does, you will need to take her to another tank.A female gourami can lay a large amount of eggs, up to
800.The male of the species actually becomes the protector of the eggs.
In fact, he becomes so protective that he will attack the female if she approaches.
Therefore, she needs to be taken away so she isn't harmed and the male can be at peace.
In fact, you may not be able to see the eggs due to the bubbles, but you should be able to notice the male staying close to the nest., When the fry start swimming, you should remove the male to another tank (not the same one as the female).
You need to remove him because he could start eating the fry once they start swimming.The fry will hatch in a day, but they won't start swimming for four days.
You need to remove the male before they start swimming., You have two main options for feeding the babies.
You can either feed them infusoria, which are microworms you find at the local pet store, or liquid fry food, which you can also probably find at your pet store.Once they get large enough, they can eat baby shrimp.
Your fish should be able to eat these in about a week. -
Step 3: Have three total tanks.
-
Step 4: Make the water shallower.
-
Step 5: Add floating plants.
-
Step 6: Up the temperature.
-
Step 7: Feed the breeding pair extra.
-
Step 8: Introduce a male and female.
-
Step 9: Look for the bubble nest.
-
Step 10: Wait for the female to lay eggs.
-
Step 11: Look for the hatching eggs.
-
Step 12: Feed the babies.
Detailed Guide
When breeding, gouramis need an extra large tank.
The female needs to be able to get away from the male, as the male may make a few too many advances during breeding time.The tank needs to be 30 gallons or so for breeding.
In addition, the female needs place where she can hide.
The reason for this step is the same as the reason for having a large tank.
The male may be too intrusive and threatening while breeding.You can use items like driftwood and decorations to create hiding places.
You can also use rocks for this purpose.
Make sure you buy items that are meant for the aquarium., Once your female has had her babies, she will need to be removed.Similarly, once the babies hatch, you'll need to take the male out.
That means you need a tank each for the male, female, and the babies.The other two tanks that are not for breeding can be 20 gallons each.
You can house other fish in these aquariums.
Fish that are approximately the same size work best.To scoop up a fish, you can remove some of the plant life and lower the water in the tank to make it easier to catch the fish.To acclimate the fish to the new tank, you can treat it like bringing a new fish home.
That is, place it in a smaller container or plastic bag with some of the old tank water.
Add a cup of the new water and let it sit for 10 minutes before adding just the fish to the new tank., Gouramis respond to a change in the depth of the water.
When it becomes less deep, they are more likely to breed than when it is deeper.
Remove some of the water from the tank to make the depth shallower to encourage breeding.The tank can be as low as 6 inches for breeding., Male gouramis build a bubble nest for their young.
To do so, they need plant leaves at the surface.
Therefore, you need to add plants to the aquarium to allow them to breed.Ricca is a common floating plant used with gouramis.
However, you can also use fake floating plants designed for aquariums., For breeding, the gouramis prefer the water to be a bit warmer than usual.
You'll need to increase the temperature to 80 degrees Fahrenheit.You can actually keep the tank at this temperature normally, but you can also keep it as low as 72 degrees Fahrenheit., Before you introduce the pair, you should be offering them live food or frozen food.
You can offer this food a couple of times a day in small portions.The extra protein in this diet will help prepare the pair for breeding.Blood worms are a good option for blue gouramis., Place a male gourami and a female gourami in the breeding tank you've prepared.
You don't need to do anything special to introduce the pair except placing them in the same tank.You should only have one breeding pair in the tank at a time. , The male will build a bubble nest.
It may be in a corneror under a floating plant leaf.Usually, the nest will be at the surface.
The male creates bubbles with his saliva that form a nest.
He will often join it with the side of the tank or a leaf to help it hold together., Watch the nest to see when the female lays her eggs in it.
Once she does, you will need to take her to another tank.A female gourami can lay a large amount of eggs, up to
800.The male of the species actually becomes the protector of the eggs.
In fact, he becomes so protective that he will attack the female if she approaches.
Therefore, she needs to be taken away so she isn't harmed and the male can be at peace.
In fact, you may not be able to see the eggs due to the bubbles, but you should be able to notice the male staying close to the nest., When the fry start swimming, you should remove the male to another tank (not the same one as the female).
You need to remove him because he could start eating the fry once they start swimming.The fry will hatch in a day, but they won't start swimming for four days.
You need to remove the male before they start swimming., You have two main options for feeding the babies.
You can either feed them infusoria, which are microworms you find at the local pet store, or liquid fry food, which you can also probably find at your pet store.Once they get large enough, they can eat baby shrimp.
Your fish should be able to eat these in about a week.
About the Author
Henry Gibson
Professional writer focused on creating easy-to-follow DIY projects tutorials.
Rate This Guide
How helpful was this guide? Click to rate: