How to Make Photo Magnets

Step-by-Step Guide

1. 1

   Step 1: Find square

   The size and shape will determine the shape of your magnets.
   
   Glass pieces with 1 textured side and 1 smooth side are available at craft stores or online.
2. 2

   Step 2: rectangular or round glass pieces to cover your magnets.

   Size them up on your computer so that they are small enough to fit on your magnet shape.
   
   Print them out on your computer or order them in the correct size from a photo shop. , Look for magnet sheets with an adhesive side.
   
   If you cannot find this, then you can also buy individual button magnets.
   
   Neodymium magnets are stronger than traditional fridge magnets.
   
   Many magnet sheets that are sold in craft stores are not strong enough to hold up items, and can only be used for decoration. ,,, If you are using button magnets, ignore this step. ,, Wipe it clean with a lint-free cloth. , Place a thick strip of glue across the image of your cut photograph. , Slide it around to create a complete covering of the photograph.
   
   Wipe the excess glue from all the edges and allow it to dry. , Paint a layer of clear glue on the back of the photograph to seal it in.
   
   Allow it to dry. , Depending upon the magnet you chose, you can do this in a few different ways.
   
   If you chose a magnet sheet with adhesive on 1 side, cut out the correct size according to your glass shape.
   
   Remove the tape from the adhesive side and carefully place it on the back of your photograph.
   
   Press on it firmly.
   
   If you chose a button magnet, then apply a dot of superglue onto the back of your photograph.
   
   Place it on the center, or place 2 dots, if it is a large photograph.
   
   Press button magnets onto the points of glue.
   
   Remove excess with a toothpick.
   
   Allow it to dry.
3. 3

   Step 3: Select the photos that you would like to use as magnets.

4. 4

   Step 4: Buy a sheet of neodymium magnets online or at a craft store.

5. 5

   Step 5: Trace the shape of your glass piece over your photograph with a pencil.

6. 6

   Step 6: Cut out the shape with a pair of sharp scissors.

7. 7

   Step 7: Trace and cut out the same sized shape on your magnet sheet

8. 8

   Step 8: if you are using an adhesive magnet sheet.

9. 9

   Step 9: Place some newspaper or cardboard over your work surface

10. 10

    Step 10: so that you don't get any glue on the table.

11. 11

    Step 11: Clean your glass with vinegar.

12. 12

    Step 12: Choose a strong

13. 13

    Step 13: clear glue

14. 14

    Step 14: such as Diamond Glaze

15. 15

    Step 15: to affix your glass to your photograph.

16. 16

    Step 16: Set the textured side of the glass down on top of the glue.

17. 17

    Step 17: Flip the glass around so the back of the photograph is exposed.

18. 18

    Step 18: Affix the photograph to the magnet.

Detailed Guide

About the Author