How to Start Using the Pinnacle Video Transfer Device
Examine the product, So, we have the RCA inputs, which is S-Video, Composite Video, and Audio., Update the firmware of the video transfer., To record a video from the Pinnacle Video Transfer to a portable thing, like the PSP and the iPods, such as...
Step-by-Step Guide
-
Step 1: Examine the product
This is the analog in.
The digital out has the USB2.com, and the Power Supply. -
Step 2: we have the RCA inputs
To do this, download the latest firmware on a flash stick, plug the flash stick into the unpowered video transfer.
Plug in the video transfer, and see, when you plug in into the video transfer, the Pinnacle will automatically flash a few blue lights on the bottom center of the Pinnacle.
It is recognizing the update.
Wait for the few blue lights to flash three times and it will tell us the update has successfully done.
Then it will flash five blue lights after the update of the firmware. , Make sure the device firmware is also updated as well.
The PSP has to required version
2.81 or higher The iPod Nano requires version
1.2 or higher On the iPhone or iPod Touch, it requires to use the Pinnacle to transfer to the hard drive, later, you must use iTunes to send the video, make sure the iPhone and iPod Touch is completely synced from the Macintosh. , Use Fat 32 as better. , This is going to allow viewing H.264.MPEG4 File. , To turn the Pinnacle (unit) on, press the "MODE" button.
Pressing the mode button can even change the quality.
It can go from Good, Better, and Best.
To shut down the unit, press the MODE for a couple of seconds still, until it turns off and no longer having blue lights. -
Step 3: which is S-Video
-
Step 4: Composite Video
-
Step 5: and Audio.
-
Step 6: Update the firmware of the video transfer.
-
Step 7: To record a video from the Pinnacle Video Transfer to a portable thing
-
Step 8: like the PSP and the iPods
-
Step 9: such as iPod
-
Step 10: iPod Nano.
-
Step 11: If planning to capture it and transfer into a USB hard drive or a flash memory stick
-
Step 12: make sure it is formatted Fat 16 or Fat 32.
-
Step 13: If you are going to record and watch it on a PC (Personal Computer) and a Macintosh
-
Step 14: make sure to have QuickTime installed.
-
Step 15: To do the one-click button
-
Step 16: Make sure to plug the Pinnacle Video Transfer.
Detailed Guide
This is the analog in.
The digital out has the USB2.com, and the Power Supply.
To do this, download the latest firmware on a flash stick, plug the flash stick into the unpowered video transfer.
Plug in the video transfer, and see, when you plug in into the video transfer, the Pinnacle will automatically flash a few blue lights on the bottom center of the Pinnacle.
It is recognizing the update.
Wait for the few blue lights to flash three times and it will tell us the update has successfully done.
Then it will flash five blue lights after the update of the firmware. , Make sure the device firmware is also updated as well.
The PSP has to required version
2.81 or higher The iPod Nano requires version
1.2 or higher On the iPhone or iPod Touch, it requires to use the Pinnacle to transfer to the hard drive, later, you must use iTunes to send the video, make sure the iPhone and iPod Touch is completely synced from the Macintosh. , Use Fat 32 as better. , This is going to allow viewing H.264.MPEG4 File. , To turn the Pinnacle (unit) on, press the "MODE" button.
Pressing the mode button can even change the quality.
It can go from Good, Better, and Best.
To shut down the unit, press the MODE for a couple of seconds still, until it turns off and no longer having blue lights.
About the Author
Theresa Martinez
Professional writer focused on creating easy-to-follow creative arts tutorials.
Rate This Guide
How helpful was this guide? Click to rate: