How to Extend a Wireless Network
Set your main router as your base station., Find your basic wireless settings, which should be located either on the main login screen or under "Settings.", Select "Repeating Functions" or "Signal Repeat Settings" or any menu item that mentions...
Step-by-Step Guide
-
Step 1: Set your main router as your base station.
Make sure your router is connected to your computer via ethernet cable.
This will allow you to login directly to the router.
Login to the router from a browser (in the URL bar:
192.168.0.1 or
192.168.1.1 are the standards).
If you've enabled a password, enter your login and password credentials now.
If you haven't, then standard settings for most routers are a login of admin and a password of password, or admin and admin. -
Step 2: Find your basic wireless settings
From here you will want to make sure that your router is broadcasting with the strongest signal possible � the most Mbps, or megabits per second, setting available.
If you haven't changed the name of your wireless network or SSID, do so now and make a note of it.
This will help when setting up your wireless repeater. , From here you will be given an option to enable wireless repeating function in your network.
You will establish your primary router as your base station at this point.
Make sure that you select the base station functions for this router and not repeater settings. , The MAC address for your wireless repeater will be printed on a sticker located on the back of the unit.
The MAC address will be 16 characters.
They will be either 8 groups of 2 characters separated by hyphens or colons, or 4 groups of 4 separated by periods (i.e. 01-23-45-67-89-ab or 01:23:45:67:89:ab or
0123.4567.89ab). , Login to the router again using a web browser and the home URL
192.168.0.1 or
192.168.1.1. ,, For your wireless repeater you will assign a specific IP (Internet Protocol) address.
The first sets should be
192.168.0 (or
192.168.1), and you will enter the final digit.
You can enter any number between 1 and
255.
Write down this new IP address because you will need it to login to the wireless repeater if you need to change settings in the future. , The MAC address for the base station will be located on the back of the unit on a sticker and will have a similar look to the MAC address for the wireless repeater. ,, It should be within your known Wi-Fi signal area, but near the boundaries.
This way you will get maximum signal extension. -
Step 3: which should be located either on the main login screen or under "Settings."
-
Step 4: Select "Repeating Functions" or "Signal Repeat Settings" or any menu item that mentions repeating.
-
Step 5: where prompted
-
Step 6: the MAC or Media Access Control
-
Step 7: address of the router or repeater you will be using.
-
Step 8: Unplug the ethernet cable from the base station
-
Step 9: and connect it to your repeater or secondary router that will be acting as a wireless repeater.
-
Step 10: Go to basic settings and make sure that your wireless repeater will be communicating with the correct wireless network by typing in the specific SSID you used for your base station.
-
Step 11: Enable signal repeating functions in the repeating settings menu.
-
Step 12: Enter the MAC address of the base station.
-
Step 13: Save these settings and disconnect the repeater from your computer.
-
Step 14: Find a suitable location for your wireless repeater.
Detailed Guide
Make sure your router is connected to your computer via ethernet cable.
This will allow you to login directly to the router.
Login to the router from a browser (in the URL bar:
192.168.0.1 or
192.168.1.1 are the standards).
If you've enabled a password, enter your login and password credentials now.
If you haven't, then standard settings for most routers are a login of admin and a password of password, or admin and admin.
From here you will want to make sure that your router is broadcasting with the strongest signal possible � the most Mbps, or megabits per second, setting available.
If you haven't changed the name of your wireless network or SSID, do so now and make a note of it.
This will help when setting up your wireless repeater. , From here you will be given an option to enable wireless repeating function in your network.
You will establish your primary router as your base station at this point.
Make sure that you select the base station functions for this router and not repeater settings. , The MAC address for your wireless repeater will be printed on a sticker located on the back of the unit.
The MAC address will be 16 characters.
They will be either 8 groups of 2 characters separated by hyphens or colons, or 4 groups of 4 separated by periods (i.e. 01-23-45-67-89-ab or 01:23:45:67:89:ab or
0123.4567.89ab). , Login to the router again using a web browser and the home URL
192.168.0.1 or
192.168.1.1. ,, For your wireless repeater you will assign a specific IP (Internet Protocol) address.
The first sets should be
192.168.0 (or
192.168.1), and you will enter the final digit.
You can enter any number between 1 and
255.
Write down this new IP address because you will need it to login to the wireless repeater if you need to change settings in the future. , The MAC address for the base station will be located on the back of the unit on a sticker and will have a similar look to the MAC address for the wireless repeater. ,, It should be within your known Wi-Fi signal area, but near the boundaries.
This way you will get maximum signal extension.
About the Author
Laura White
Enthusiastic about teaching hobbies techniques through clear, step-by-step guides.
Rate This Guide
How helpful was this guide? Click to rate: