How to Access Internet on a Laptop or PC Via GPRS Enabled Handset Using PC Suite

Step-by-Step Guide

1. 1

   Step 1: Switch on the bluetooth of your GPRS enabled bluetooth handset and attach bluetooth dongle to PC or Laptop.

   You will be asked for your location.that is your country. enter your country's name.
   
   Then you will be asked for area code of your country.Enter the area code-that is 91 for India,and different codes for different countries. , Choose Pulse dialling.Click OK then. ,,, Now,on the same box,select "Advanced" tab on the top of the page.
   
   Now you'll have to type the "extra initialization command"
   
   Which varies upon the mobile network connection you have.You must have to take this command from your network customer service center.
   
   After filling the "extra initialization command"
   
   click ok. ,, Click on Setup a new connection.
   
   Then Setup a Dial Up connection.
   
   New dialog box will open asking for dial up phone number,enter *99***1#for branded mobile phone or *99# for local or Chinese handset. enter your name and password (can be left blank) and type connection name, you can name this connection on your desire,even your name.
   
   Check allow other people to use this connection.and click on connect.
   
   New dialog box appears,you don't have to do anything just click on dial.
   
   And see you would be connected to internet. ,,,
2. 2

   Step 2: bluetooth contain firmware

3. 3

   Step 3: it automatically installs in the computer or Laptop without any suite or driver.

4. 4

   Step 4: Pair your phone and Pc or Laptop via bluetooth connection wizard.

5. 5

   Step 5: Now go to phone and modem options given on the control panel.

6. 6

   Step 6: You will have to choose any among two options-those are-pulse dialing and tone dialing.

7. 7

   Step 7: you have configured your dialling rules..

8. 8

   Step 8: Now under modems tab in phone and modem options dialog box

9. 9

   Step 9: single left over Standard modem via bluetooth link.and click on options at the bottom of the box]

10. 10

    Step 10: New dialog box will open- Under "General" select change settings.

11. 11

    Step 11: Now your phone has been configured.

12. 12

    Step 12: Now go to Network and sharing center or Network connection in Control Panel.

13. 13

    Step 13: to connect again later just choose the earlier made connection from network connections or network and sharing center.

14. 14

    Step 14: Desktop shortcut can also be made.

15. 15

    Step 15: Congratulations

16. 16

    Step 16: you did it

Detailed Guide

About the Author