How to Connect HP LaserJet 1010 to Windows

Step-by-Step Guide

1. 1

   Step 1: Connect your HP LaserJet 1010 to your computer.

   Do this using the USB data cable.
   
   Plug the ends of the cable, respectively, into the compatible ports on each device.
2. 2

   Step 2: Plug the printer to a power supply.

   Then, switch it on., It is located on the lower-left corner of the screen. ,,,, Click on “Next” to go to the next page. , Then select “HP LaserJet 3055 PCL5” under the list of printers. ,,, Choose whether to set it as the default printer.
   
   Once you’re done, click on “Finish” to complete the settings.
3. 3

   Step 3: Click on the Orb button.

4. 4

   Step 4: Select “Control Panel.” Click on “Devices and Printers.”

5. 5

   Step 5: Click on “Add a Printer.” This is found on the upper-left corner of the window.

6. 6

   Step 6: Choose “Add a Local Printer.” Click on “Next” to proceed.

7. 7

   Step 7: Select “Use an existing port.” A drop-down list will show; select “DOT4_001” from the options.

8. 8

   Step 8: Choose “HP” from the list of manufacturers.

9. 9

   Step 9: Select “Use the driver that is currently installed.” Click on “Next” to proceed.

10. 10

    Step 10: Type in the name you want for your printer.

11. 11

    Step 11: Choose whether to share the printer or not.

Detailed Guide

About the Author