How to Use Your Mobile Broadband Connection Card for Your Wireless Router

Step-by-Step Guide

1. 1

   Step 1: Make sure you have an active mobile broadband connection from a cellular provider it could be from a USB or Laptop card device.

   Check off that box. , Then click OK. , Your computer may lose connectivity with other computers on your network.
   
   If these other computers have static IP addresses, it is a good idea to set them to obtain their IP addresses automatically.
   
   Are you sure you want to enable Internet Connection Sharing? , And Voila !
2. 2

   Step 2: Log onto the administrator or host account of your computer.

3. 3

   Step 3: Go to Start

4. 4

   Step 4: then click on Control Panel.

5. 5

   Step 5: Find Network and internet Connections and click on it.

6. 6

   Step 6: Select Network Connections.

7. 7

   Step 7: Select your type of internet connection

8. 8

   Step 8: then click Properties.

9. 9

   Step 9: Click on the Advanced tab.

10. 10

    Step 10: Look under Internet Connection Sharing

11. 11

    Step 11: there should be a check-off box that says Allow other network users to connect through this computer's Internet connection.

12. 12

    Step 12: If you use dial-up for your internet connection

13. 13

    Step 13: check off Establish a dial-up connection whenever a computer on my network attempts to access the Internet.

14. 14

    Step 14: Click "Yes" when you receive this message; When Internet Connection Sharing is enabled

15. 15

    Step 15: your LAN adapter will be set to use IP address 192.168.0.1.

16. 16

    Step 16: Run a Cat 5 cable from your desktop or laptop with active Mobile broadband ICS connection from the computers LAN port to the Routers Internet In Port.

Detailed Guide

About the Author